Question 1

What are the key features of Infineon Technologies AG IAUC60N04S6N050HATMA1?

EZKEY · Accepted Answer

This product belongs to the General Purpose Semiconductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Infineon Technologies AG with full traceability.

Question 2

What are the main application scenarios for IAUC60N04S6N050HATMA1?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does IAUC60N04S6N050HATMA1 work?

EZKEY · Accepted Answer

This device follows established General Purpose Semiconductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of IAUC60N04S6N050HATMA1?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for IAUC60N04S6N050HATMA1?

EZKEY · Accepted Answer

The global General Purpose Semiconductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Infineon Technologies AG IAUC60N04S6N050HATMA1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of IAUC60N04S6N050HATMA1?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Infineon Technologies AG provides full technical support and reference designs.

Application	General Purpose
Brand	Infineon Technologies AG
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +150 C
Packaging	Tape & Reel
Product Type	Semiconductor Component
RoHS	Compliant
Series	Infineon

Recommended Part	Brand	Description
IM523X6AXKMA1	Infineon Technologies AG	Intelligent Power Modules - IPMs CIPOS MINI
IPS6031RPBF	Infineon Technologies AG	IC, MOSFET, IPS, D-PAK, Power Load Switch Type:High Side, Input Voltage:5.5V, Current Limit:16A, On State Resistance:0.046ohm, Distribution Switch Case Style:TO-252, No. of Pins:5Pins, Thermal Protection:Yes, On / Enable Input RoHS Compliant: Yes Min Qty: 1 Container: Bulk
SAK-XE164FM-72F80LR	Infineon Technologies AG	16位微控制器 - MCU 16 BIT FLASH C11 IMM

IAUC60N04S6N050HATMA1 | Infineon Technologies AG MOSFET MOSFET_(20V 40V)

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

IAUC60N04S6N050HATMA1 Application and Selection Guide

IAUC60N04S6N050HATMA1 Model and Manufacturer Information

IAUC60N04S6N050HATMA1 Product Parameters and Description

IAUC60N04S6N050HATMA1 Application and Selection Reference

Recommended Part Numbers for IAUC60N04S6N050HATMA1