What are the key features of TDK Corporation IAM-20685?

This product belongs to the IMUs - Inertial Measurement Units category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by TDK Corporation with full traceability.

What are the main application scenarios for IAM-20685?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does IAM-20685 work?

This device follows established IMUs - Inertial Measurement Units design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of IAM-20685?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for IAM-20685?

The global IMUs - Inertial Measurement Units market is growing at ~6-8% CAGR, with particularly strong demand in power management. TDK Corporation IAM-20685 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of IAM-20685?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, TDK Corporation provides full technical support and reference designs.

IAM-20685 IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262. by TDK Corporation

IAM-20685 | TDK Corporation IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262.

Category: IMUs - Inertial Measurement Units

Brand: TDK Corporation

IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262.

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262.

Technical Parameters

Application	General Purpose
Brand	TDK Corporation
Category	IMUs - Inertial Measurement Units
Data Tier	General Description
Description	IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262.
Lead Free	Yes
Manufacturer	TDK InvenSense
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Electronic Component
RoHS	Compliant
Series	TDK

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

IAM-20685 Application and Selection Guide

IAM-20685 Model and Manufacturer Information

IAM-20685, a IMUs - Inertial Measurement Units manufactured by TDK Corporation: IAM-20685 helps you confirm the specific model, while TDK Corporation helps you confirm the product source. If you are selecting a part, you can first check whether IAM-20685 meets your requirements, then check whether TDK Corporation matches your expectations, and then refer to IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262. for further evaluation.

IAM-20685 Product Parameters and Description

The main parameters of TDK Corporation's IMUs - Inertial Measurement Units product IAM-20685 include IMUs - Inertial Measurement Units The IAM-20685 is a new ASIL-B monolithic 6-axis MEMS IMU developed in compliance with ISO 26262.. This is a IMUs - Inertial Measurement Units produced by TDK Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

IAM-20685 Application and Selection Reference

TDK Corporation's IMUs - Inertial Measurement Units product IAM-20685 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, IAM-20685 is a IMUs - Inertial Measurement Units solution worth considering, and manufacturer TDK Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for IAM-20685

Designers looking for IAM-20685 recommended parts can evaluate the following options. IAM-20685 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LTF5022T-100M1R4-LC	TDK Corporation	FIXED IND 10UH 1.7A 160 MOHM SMD
MLF2012E100JT000	TDK Corporation	FIXED IND 10UH 15MA 800 MOHM SMD
NTCDS3HG103HC3NB	TDK Corporation	NTC Thermistors AEC-Q200 10kOhm 3% B25/85:3400K+-2%

EZKEY can provide IAM-20685 recommended part comparison data and engineering samples for evaluation.