Question 1

What are the key features of Vishay Dale GSIB2580-E3/45?

EZKEY · Accepted Answer

This product belongs to the General Purpose category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Dale with full traceability.

Question 2

What are the main application scenarios for GSIB2580-E3/45?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does GSIB2580-E3/45 work?

EZKEY · Accepted Answer

This device follows established General Purpose design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of GSIB2580-E3/45?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for GSIB2580-E3/45?

EZKEY · Accepted Answer

The global General Purpose market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Dale GSIB2580-E3/45 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of GSIB2580-E3/45?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Dale provides full technical support and reference designs.

Data Tier	General Description
Description	General electronic component
Mounting Type	Surface Mount
Product Type	Electronic Component
RoHS	Compliant

Recommended Part	Brand	Description
VY1472M51Y5VQ6UV0	Vishay Dale	Safety Capacitors VY1 X760Y500VAC 4.7NF 20% Y5V AMMO E3
SMP5.0A-M3/85A	Vishay Dale	ESD 抑制器/TVS 二极管 400W, 5.0V 5% Unidir SMP TVS Diode
MBB02070C1808FCT00	Vishay Dale	Res Thin Film 1.8 Ohm 1% 0.6W ±50ppm/°C Conformal Coated AXL Medical Ammo

GSIB2580-E3/45 | Vishay Dale General electronic component

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

GSIB2580-E3/45 Application and Selection Guide

GSIB2580-E3/45 Model and Manufacturer Information

GSIB2580-E3/45 Product Parameters and Description

GSIB2580-E3/45 Application and Selection Reference

Recommended Part Numbers for GSIB2580-E3/45