What are the key features of NXP Semiconductors FS32K118LAT0MLFR?

This product belongs to the ARM Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for FS32K118LAT0MLFR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does FS32K118LAT0MLFR work?

This device follows established ARM Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of FS32K118LAT0MLFR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for FS32K118LAT0MLFR?

The global ARM Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors FS32K118LAT0MLFR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of FS32K118LAT0MLFR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

FS32K118LAT0MLFR ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose by NXP Semiconductors

FS32K118LAT0MLFR | NXP Semiconductors ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose

Category: ARM Microcontrollers - MCU

Brand: NXP Semiconductors

ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose

Technical Parameters

Applications	General Purpose
Category	ARM Microcontrollers - MCU
Data Tier	General Description
Description	ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose
Features	General Purpose
Lead Free	Yes
Manufacturer	NXP Semiconductors
Mounting Type	Surface Mount
Operating Temperature	-40°C ~ +85°C
Packaging	Reel
Product Type	Electronic Component
RoHS	Compliant
Standard Pack Qty	2000
Status	Active
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 FS32K118LAT0MLFR Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/NXP-Semiconductors/FS32K118LAT0MLFR?qs=byeeYqUIh0PaLoS94wdQYw%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

FS32K118LAT0MLFR Application and Selection Guide

FS32K118LAT0MLFR Model and Manufacturer Information

FS32K118LAT0MLFR, a ARM Microcontrollers - MCU manufactured by NXP Semiconductors: FS32K118LAT0MLFR helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether FS32K118LAT0MLFR meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose for further evaluation.

FS32K118LAT0MLFR Product Parameters and Description

The main parameters of NXP Semiconductors's ARM Microcontrollers - MCU product FS32K118LAT0MLFR include ARM Microcontrollers - MCU S32K118 Arm Cortex-M0+, 48 MHz, 256 Kb Flash, CAN FD, FlexIO, CSEc security, LQFP48 - S32K MCUs for General-Purpose. This is a ARM Microcontrollers - MCU produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

FS32K118LAT0MLFR Application and Selection Reference

NXP Semiconductors's ARM Microcontrollers - MCU product FS32K118LAT0MLFR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, FS32K118LAT0MLFR is a ARM Microcontrollers - MCU solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for FS32K118LAT0MLFR

Designers looking for FS32K118LAT0MLFR recommended parts can evaluate the following options. FS32K118LAT0MLFR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
FS32K148HAT0MMHR	NXP Semiconductors	General electronic component
FXLS8964AFR3	NXP Semiconductors	Accelerometers 3-axis low-g accelerometer: ultra-low power 3-axis accelerometer for automotive keyfob applications
FS32K146HFT0VLH	NXP Semiconductors	General electronic component

EZKEY can provide FS32K118LAT0MLFR recommended part comparison data and engineering samples for evaluation.