What are the key features of Hirose Electric Co Ltd FH65-10S-0.5SH(99)?

This product belongs to the FFC & FPC Connectors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Hirose Electric Co Ltd with full traceability.

What are the main application scenarios for FH65-10S-0.5SH(99)?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does FH65-10S-0.5SH(99) work?

This device follows established FFC & FPC Connectors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of FH65-10S-0.5SH(99)?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for FH65-10S-0.5SH(99)?

The global FFC & FPC Connectors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Hirose Electric Co Ltd FH65-10S-0.5SH(99) is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of FH65-10S-0.5SH(99)?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Hirose Electric Co Ltd provides full technical support and reference designs.

FH65-10S-0.5SH(99) FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF by Hirose Electric Co Ltd

FH65-10S-0.5SH(99) | Hirose Electric Co Ltd FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF

Category: FFC & FPC Connectors

Brand: Hirose Electric Co Ltd

FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF

Technical Parameters

Applications	Wire-to-Board
Brand	Hirose
Category	FFC & FPC Connectors
Contact Material	Copper Alloy
Contact Plating	Gold
Data Tier	Family Level
Description	FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF
Features	General Purpose
Housing Material	Thermoplastic
Lead Free	Yes
Manufacturer	Hirose Connector
Mounting Angle	Straight
Mounting Type	Surface Mount
Number of Rows	1
Operating Temperature	-40 to +85 C
Package / Case	SMD
Packaging	Reel
Product Type	Board-to-Board Connector
RoHS	Compliant
Standard Pack Qty	500
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 FH65-10S-0.5SH(99) Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Hirose-Connector/FH65-10S-0.5SH99?qs=QNEnbhJQKva5BPjqP7Q%2FeQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

FH65-10S-0.5SH(99) Application and Selection Guide

FH65-10S-0.5SH(99) Model and Manufacturer Information

FH65-10S-0.5SH(99), a FFC & FPC Connectors manufactured by Hirose: FH65-10S-0.5SH(99) helps you confirm the specific model, while Hirose helps you confirm the product source. If you are selecting a part, you can first check whether FH65-10S-0.5SH(99) meets your requirements, then check whether Hirose matches your expectations, and then refer to FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF for further evaluation.

FH65-10S-0.5SH(99) Product Parameters and Description

The main parameters of Hirose's FFC & FPC Connectors product FH65-10S-0.5SH(99) include FFC & FPC Connectors Receptacle, 0.5mm Pitch, 6.8mm Length, 1.2mm Height, 10 Pos, ZIF. This is a FFC & FPC Connectors produced by Hirose, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

FH65-10S-0.5SH(99) Application and Selection Reference

Hirose's FFC & FPC Connectors product FH65-10S-0.5SH(99) has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, FH65-10S-0.5SH(99) is a FFC & FPC Connectors solution worth considering, and manufacturer Hirose provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for FH65-10S-0.5SH(99)

Designers looking for FH65-10S-0.5SH(99) recommended parts can evaluate the following options. FH65-10S-0.5SH(99) selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
DF40PC(2.5)-40DS-0.4V(51)	Hirose Electric Co Ltd	Hirose Electric
DF20F-10DP-1V(55)	Hirose Electric Co Ltd	CONN HEADER 10POS DUAL SMD
DF17(3.0H)-80DS-0.5V(57)	Hirose Electric Co Ltd	Board to Board & Mezzanine Connectors 80 POS RECP SMT GOLD W/FITTING AND BOSS

EZKEY can provide FH65-10S-0.5SH(99) recommended part comparison data and engineering samples for evaluation.