What are the key features of Vishay Dale ES1B/11T?

This product belongs to the Chip Resistors - Surface Mount category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Dale with full traceability.

What are the main application scenarios for ES1B/11T?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ES1B/11T work?

This device follows established Chip Resistors - Surface Mount design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ES1B/11T?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ES1B/11T?

The global Chip Resistors - Surface Mount market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Dale ES1B/11T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ES1B/11T?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Dale provides full technical support and reference designs.

ES1B/11T | Vishay Dale

Category: Chip Resistors - Surface Mount

Brand: Vishay Dale

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description:

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ES1B/11T Application and Selection Guide

ES1B/11T Model and Manufacturer Information

ES1B/11T, a Chip Resistors - Surface Mount manufactured by Vishay: ES1B/11T helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether ES1B/11T meets your requirements, then check whether Vishay matches your expectations, and then refer to for further evaluation.

ES1B/11T Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product ES1B/11T include . This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ES1B/11T Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product ES1B/11T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ES1B/11T is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ES1B/11T

Designers looking for ES1B/11T recommended parts can evaluate the following options. ES1B/11T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRCW080549K9FKEA	Vishay Dale	RES SMD 49.9K OHM 1% 1/8W 0805
CRCW20101K00FKEFHP	Vishay Dale	Thick Film Resistors - SMD 1.75W 1Kohms 1% High Power AEC-Q200
MCA231	Vishay Dale	Darlington-npn-output Dc-input Optocoupler, 1-channel, 4.4kv Isolation, Dip

EZKEY can provide ES1B/11T recommended part comparison data and engineering samples for evaluation.