Question 1

What are the key features of Panasonic Electronic Components ERJ-8ENF1401V?

EZKEY · Accepted Answer

This product belongs to the Chip Resistors - Surface Mount category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Panasonic Electronic Components with full traceability.

Question 2

What are the main application scenarios for ERJ-8ENF1401V?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does ERJ-8ENF1401V work?

EZKEY · Accepted Answer

This device follows established Chip Resistors - Surface Mount design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of ERJ-8ENF1401V?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for ERJ-8ENF1401V?

EZKEY · Accepted Answer

The global Chip Resistors - Surface Mount market is growing at ~6-8% CAGR, with particularly strong demand in power management. Panasonic Electronic Components ERJ-8ENF1401V is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of ERJ-8ENF1401V?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Panasonic Electronic Components provides full technical support and reference designs.

Applications	General Purpose
Brand	Panasonic
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +155 C
Package / Case	SMD
Packaging	Tape and Reel
Product Type	Chip Resistor
RoHS	Compliant
Temperature Coefficient	+/-100 ppm/deg C
Termination	Tin Plated

Recommended Part	Brand	Description
ERJ-3GEYJ561V	Panasonic Electronic Components	RES SMD 560 OHM 5% 1/10W 0603
ERJ3EKF2202V	Panasonic Electronic Components	ERJ Series 0603 22 kO ±1 % 0.1 W ±100 ppm/°C Molded SMT Thick Film Chip Resistor
ERJ-3EKF2002V	Panasonic Electronic Components	RES 20K OHM 1/10W 1% 0603 SMD

ERJ-8ENF1401V | Panasonic Electronic Components RES 1.4K OHM 1/4W 1% 1206 SMD

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

ERJ-8ENF1401V Application and Selection Guide

ERJ-8ENF1401V Model and Manufacturer Information

ERJ-8ENF1401V Product Parameters and Description

ERJ-8ENF1401V Application and Selection Reference

Recommended Part Numbers for ERJ-8ENF1401V