What are the key features of ECS Inc. International ECS-CTE-8.00-33-TR?

This product belongs to the Resonators category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by ECS Inc. International with full traceability.

What are the main application scenarios for ECS-CTE-8.00-33-TR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ECS-CTE-8.00-33-TR work?

This device follows established Resonators design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ECS-CTE-8.00-33-TR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ECS-CTE-8.00-33-TR?

The global Resonators market is growing at ~6-8% CAGR, with particularly strong demand in power management. ECS Inc. International ECS-CTE-8.00-33-TR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ECS-CTE-8.00-33-TR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, ECS Inc. International provides full technical support and reference designs.

ECS-CTE-8.00-33-TR Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm by ECS Inc. International

ECS-CTE-8.00-33-TR | ECS Inc. International Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm

Category: Resonators

Brand: ECS Inc. International

Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm

Technical Parameters

Applications	General Purpose
Brand	ECS
Category	Resonators
Data Tier	Family Level
Description	Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm
Features	General Purpose
Frequency Tolerance	30 ppm
Lead Free	Yes
Load Capacitance	15 pF
Manufacturer	ECS
Mounting Type	Surface Mount
Operating Temperature	-20 to +70 C
Output Type	CMOS
Package / Case	SMD / Through Hole
Packaging	Reel
Product Type	Crystal / Oscillator
RoHS	Compliant
Standard Pack Qty	3000
Supply Voltage	3.3 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 ECS-CTE-8.00-33-TR Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/ECS/ECS-CTE-8.00-33-TR?qs=DPoM0jnrROU5fZ9%2FBQ1XCQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ECS-CTE-8.00-33-TR Application and Selection Guide

ECS-CTE-8.00-33-TR Model and Manufacturer Information

ECS-CTE-8.00-33-TR, a Resonators manufactured by ECS: ECS-CTE-8.00-33-TR helps you confirm the specific model, while ECS helps you confirm the product source. If you are selecting a part, you can first check whether ECS-CTE-8.00-33-TR meets your requirements, then check whether ECS matches your expectations, and then refer to Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm for further evaluation.

ECS-CTE-8.00-33-TR Product Parameters and Description

The main parameters of ECS's Resonators product ECS-CTE-8.00-33-TR include Resonators 8MHz Ceramic Resonator Built in Capacitor 33pF 30 Ohms -40 C 85 C Surface Mount 3.2 x 1.3 x 1.0 mm. This is a Resonators produced by ECS, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ECS-CTE-8.00-33-TR Application and Selection Reference

ECS's Resonators product ECS-CTE-8.00-33-TR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ECS-CTE-8.00-33-TR is a Resonators solution worth considering, and manufacturer ECS provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ECS-CTE-8.00-33-TR

Designers looking for ECS-CTE-8.00-33-TR recommended parts can evaluate the following options. ECS-CTE-8.00-33-TR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ECS-480-8-37B2-CES-TR	ECS Inc. International	--
ECS-240-18-33-JGN-TR3	ECS Inc. International	--
ECS-320-8-36CKM-TR3	ECS Inc. International	Crystals 32MHz,CL 8,TOL 10 ppm,STAB 10 ppm,-20 +70 C,ESR O50

EZKEY can provide ECS-CTE-8.00-33-TR recommended part comparison data and engineering samples for evaluation.