DIN7A-J-P-GF-RA-BH1 CONN 1.0/2.3 JACK R/A 75OHM PCB by Samtec Inc.

DIN7A-J-P-GF-RA-BH1 | Samtec Inc. CONN 1.0/2.3 JACK R/A 75OHM PCB

Name: DIN7A-J-P-GF-RA-BH1
Brand: Samtec Inc.
SKU: DIN7A-J-P-GF-RA-BH1

Category: Board to Board & Mezzanine Connectors

Brand: Samtec Inc.

CONN 1.0/2.3 JACK R/A 75OHM PCB

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CONN 1.0/2.3 JACK R/A 75OHM PCB

Technical Parameters

Applications	Wire-to-Board
Brand	Samtec
Contact Material	Copper Alloy
Contact Plating	Gold
Data Tier	Family Level
Features	General Purpose
Housing Material	Thermoplastic
Lead Free	Yes
Mounting Angle	Straight
Mounting Type	Surface Mount
Number of Rows	1
Operating Temperature	-55 to +125 C
Package / Case	SMD
Product Type	Board-to-Board Connector
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

DIN7A-J-P-GF-RA-BH1 Application and Selection Guide

DIN7A-J-P-GF-RA-BH1 Model and Manufacturer Information

DIN7A-J-P-GF-RA-BH1, a Board to Board & Mezzanine Connectors manufactured by Samtec: DIN7A-J-P-GF-RA-BH1 helps you confirm the specific model, while Samtec helps you confirm the product source. If you are selecting a part, you can first check whether DIN7A-J-P-GF-RA-BH1 meets your requirements, then check whether Samtec matches your expectations, and then refer to CONN 1.0/2.3 JACK R/A 75OHM PCB for further evaluation.

DIN7A-J-P-GF-RA-BH1 Product Parameters and Description

The main parameters of Samtec's Board to Board & Mezzanine Connectors product DIN7A-J-P-GF-RA-BH1 include CONN 1.0/2.3 JACK R/A 75OHM PCB. This is a Board to Board & Mezzanine Connectors produced by Samtec, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

DIN7A-J-P-GF-RA-BH1 Application and Selection Reference

Samtec's Board to Board & Mezzanine Connectors product DIN7A-J-P-GF-RA-BH1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, DIN7A-J-P-GF-RA-BH1 is a Board to Board & Mezzanine Connectors solution worth considering, and manufacturer Samtec provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for DIN7A-J-P-GF-RA-BH1

Designers looking for DIN7A-J-P-GF-RA-BH1 recommended parts can evaluate the following options. DIN7A-J-P-GF-RA-BH1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
FTS-105-01-F-DV-P-TR	Samtec Inc.	CONN HEADER 10POS DUAL .05" SMD
EHT-112-01-F-D	Samtec Inc.	2MM EJECTOR HEADER
DW-08-19-T-S-1000	Samtec Inc.	.025" BOARD SPACERS

EZKEY can provide DIN7A-J-P-GF-RA-BH1 recommended part comparison data and engineering samples for evaluation.