What are the key features of Vishay Dale DG202BDY-E3?

This product belongs to the Chip Resistors - Surface Mount category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Vishay Dale with full traceability.

What are the main application scenarios for DG202BDY-E3?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does DG202BDY-E3 work?

This device follows established Chip Resistors - Surface Mount design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of DG202BDY-E3?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for DG202BDY-E3?

The global Chip Resistors - Surface Mount market is growing at ~6-8% CAGR, with particularly strong demand in power management. Vishay Dale DG202BDY-E3 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of DG202BDY-E3?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Vishay Dale provides full technical support and reference designs.

DG202BDY-E3 DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N by Vishay Dale

DG202BDY-E3 | Vishay Dale DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N

Category: Chip Resistors - Surface Mount

Brand: Vishay Dale

DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

DG202BDY-E3 Application and Selection Guide

DG202BDY-E3 Model and Manufacturer Information

DG202BDY-E3, a Chip Resistors - Surface Mount manufactured by Vishay: DG202BDY-E3 helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether DG202BDY-E3 meets your requirements, then check whether Vishay matches your expectations, and then refer to DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N for further evaluation.

DG202BDY-E3 Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product DG202BDY-E3 include DG202B Series SPST 22 V 160 Ohm SMT Improved CMOS Analog Switch - SOIC-16N. This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

DG202BDY-E3 Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product DG202BDY-E3 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, DG202BDY-E3 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for DG202BDY-E3

Designers looking for DG202BDY-E3 recommended parts can evaluate the following options. DG202BDY-E3 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
EGF1T-E3/67A	Vishay Dale	Rectifier Diode Switching 1.3KV 75ns 2-Pin DO-214BA T/R
CRCW0603470RFKEAC	Vishay Dale	RES SMD 470 OHM 1% 1/10W 0603
CRCW0402120KFKED	Vishay Dale	RES SMD 120K OHM 1% 1/16W 0402

EZKEY can provide DG202BDY-E3 recommended part comparison data and engineering samples for evaluation.