What are the key features of Hirose Electric Co Ltd DF13-3P-1.25DSA(05)?

This product belongs to the Headers & Wire Housings category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Hirose Electric Co Ltd with full traceability.

What are the main application scenarios for DF13-3P-1.25DSA(05)?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does DF13-3P-1.25DSA(05) work?

This device follows established Headers & Wire Housings design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of DF13-3P-1.25DSA(05)?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for DF13-3P-1.25DSA(05)?

The global Headers & Wire Housings market is growing at ~6-8% CAGR, with particularly strong demand in power management. Hirose Electric Co Ltd DF13-3P-1.25DSA(05) is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of DF13-3P-1.25DSA(05)?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Hirose Electric Co Ltd provides full technical support and reference designs.

DF13-3P-1.25DSA(05) Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole by Hirose Electric Co Ltd

DF13-3P-1.25DSA(05) | Hirose Electric Co Ltd Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole

Category: Headers & Wire Housings

Brand: Hirose Electric Co Ltd

Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole

Technical Parameters

Applications	Wire-to-Board
Brand	Hirose
Category	Headers & Wire Housings
Contact Material	Copper Alloy
Contact Plating	Gold
Data Tier	Family Level
Description	Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole
Features	General Purpose
Housing Material	Thermoplastic
Lead Free	Yes
Manufacturer	Hirose Connector
Mounting Angle	Straight
Mounting Type	Surface Mount
Number of Rows	1
Operating Temperature	-40 to +85 C
Package / Case	SMD
Packaging	Bulk
Product Type	Board-to-Board Connector
RoHS	Compliant
Standard Pack Qty	100
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 DF13-3P-1.25DSA(05) Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Hirose-Connector/DF13-3P-1.25DSA05?qs=Li%252BoUPsLEnt65vOfrPnGbw%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

DF13-3P-1.25DSA(05) Application and Selection Guide

DF13-3P-1.25DSA(05) Model and Manufacturer Information

DF13-3P-1.25DSA(05), a Headers & Wire Housings manufactured by Hirose: DF13-3P-1.25DSA(05) helps you confirm the specific model, while Hirose helps you confirm the product source. If you are selecting a part, you can first check whether DF13-3P-1.25DSA(05) meets your requirements, then check whether Hirose matches your expectations, and then refer to Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole for further evaluation.

DF13-3P-1.25DSA(05) Product Parameters and Description

The main parameters of Hirose's Headers & Wire Housings product DF13-3P-1.25DSA(05) include Headers & Wire Housings 3P, 1.25mm Pitch, Single Row Pin Header, Straight through Hole. This is a Headers & Wire Housings produced by Hirose, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

DF13-3P-1.25DSA(05) Application and Selection Reference

Hirose's Headers & Wire Housings product DF13-3P-1.25DSA(05) has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, DF13-3P-1.25DSA(05) is a Headers & Wire Housings solution worth considering, and manufacturer Hirose provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for DF13-3P-1.25DSA(05)

Designers looking for DF13-3P-1.25DSA(05) recommended parts can evaluate the following options. DF13-3P-1.25DSA(05) selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
FX2-100P-1.27SVL(71)	Hirose Electric Co Ltd	CONN HDR 100POS 1.27MM
BM23PF0.8-30DS-0.35V(51)	Hirose Electric Co Ltd	CONN RCPT 0.35MM SMD 30POS
DF13-40DS-1.25C	Hirose Electric Co Ltd	CONN SOCKET HOUSING 40POS 1.25MM

EZKEY can provide DF13-3P-1.25DSA(05) recommended part comparison data and engineering samples for evaluation.