DEA160960LT-5113B1 Application and Selection Guide
DEA160960LT-5113B1 Model and Manufacturer Information
DEA160960LT-5113B1, a Fixed Inductors manufactured by TDK: DEA160960LT-5113B1 helps you confirm the specific model, while TDK helps you confirm the product source. If you are selecting a part, you can first check whether DEA160960LT-5113B1 meets your requirements, then check whether TDK matches your expectations, and then refer to IC,Multilayer Low Pass Filter,1.6x0.8mm,TDK,RoHS,HF for further evaluation.
DEA160960LT-5113B1 Product Parameters and Description
The main parameters of TDK's Fixed Inductors product DEA160960LT-5113B1 include IC,Multilayer Low Pass Filter,1.6x0.8mm,TDK,RoHS,HF. This is a Fixed Inductors produced by TDK, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
DEA160960LT-5113B1 Application and Selection Reference
TDK's Fixed Inductors product DEA160960LT-5113B1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, DEA160960LT-5113B1 is a Fixed Inductors solution worth considering, and manufacturer TDK provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for DEA160960LT-5113B1
Designers looking for DEA160960LT-5113B1 recommended parts can evaluate the following options. DEA160960LT-5113B1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| DPX165850DT-8085D3 |
TDK Corporation of America |
|
Signal Conditioning Diplexer 0603 Low-Band 698-960MHZ High-Band 5150-5850MHz |
| CS17-F2GA103MYNSA |
TDK Corporation of America |
|
安规电容 CAP_D16.5X7MM_TM 10nF ±20% 250V X1,Y1 Φ16.50 x 7.00mm |
| FS1404-3300-AL |
TDK Corporation of America |
|
Power Supply Module, |
EZKEY can provide DEA160960LT-5113B1 recommended part comparison data and engineering samples for evaluation.