What are the key features of VISHAY CW02M1R000JE12?

This product belongs to the Chip Resistors - Surface Mount category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by VISHAY with full traceability.

What are the main application scenarios for CW02M1R000JE12?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does CW02M1R000JE12 work?

This device follows established Chip Resistors - Surface Mount design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of CW02M1R000JE12?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for CW02M1R000JE12?

The global Chip Resistors - Surface Mount market is growing at ~6-8% CAGR, with particularly strong demand in power management. VISHAY CW02M1R000JE12 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of CW02M1R000JE12?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, VISHAY provides full technical support and reference designs.

CW02M1R000JE12 Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED by VISHAY

CW02M1R000JE12 | VISHAY Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED

Category: Chip Resistors - Surface Mount

Brand: VISHAY

Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CW02M1R000JE12 Application and Selection Guide

CW02M1R000JE12 Model and Manufacturer Information

CW02M1R000JE12, a Chip Resistors - Surface Mount manufactured by Vishay: CW02M1R000JE12 helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether CW02M1R000JE12 meets your requirements, then check whether Vishay matches your expectations, and then refer to Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED for further evaluation.

CW02M1R000JE12 Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product CW02M1R000JE12 include Fixed Resistor, Wire Wound, 3W, 1ohm, 1.732V, 5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED. This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CW02M1R000JE12 Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product CW02M1R000JE12 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CW02M1R000JE12 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CW02M1R000JE12

Designers looking for CW02M1R000JE12 recommended parts can evaluate the following options. CW02M1R000JE12 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
GBPC3504WL-1E4\51	Vishay	null
CRCW08052R20FKEAHP	VISHAY	Thick Film Resistors - SMD Standard 0805, 2.2Ohms, 1%, 250mW, 100PPM, 150V
CRCW04028K25FKED	VISHAY	厚膜电阻器 - SMD 1/16watt 8.25Kohms 1%

EZKEY can provide CW02M1R000JE12 recommended part comparison data and engineering samples for evaluation.