CRS2512-FX-10R0ELF Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R by Bourns Inc.

CRS2512-FX-10R0ELF | Bourns Inc. Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R

Name: CRS2512-FX-10R0ELF
Brand: Bourns Inc.
SKU: CRS2512-FX-10R0ELF

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CRS2512-FX-10R0ELF Application and Selection Guide

CRS2512-FX-10R0ELF Model and Manufacturer Information

CRS2512-FX-10R0ELF, a Chip Resistors - Surface Mount manufactured by Bourns: CRS2512-FX-10R0ELF helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CRS2512-FX-10R0ELF meets your requirements, then check whether Bourns matches your expectations, and then refer to Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R for further evaluation.

CRS2512-FX-10R0ELF Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CRS2512-FX-10R0ELF include Res Thick Film 2512 10 Ohm 1% 2W ±100ppm/C Pad SMD T/R. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CRS2512-FX-10R0ELF Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CRS2512-FX-10R0ELF has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CRS2512-FX-10R0ELF is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CRS2512-FX-10R0ELF

Designers looking for CRS2512-FX-10R0ELF recommended parts can evaluate the following options. CRS2512-FX-10R0ELF selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRS0805-FX-1002ELF	Bourns Inc.	RES SMD 10K OHM 1% 1/4W 0805
CW100505-1N0D	Bourns Inc.	FIXED IND 1NH 1.36A 45 MOHM SMD
DR331-475BE	Bourns Inc.	CHOKE COMMON MODE 4700UH 25%

EZKEY can provide CRS2512-FX-10R0ELF recommended part comparison data and engineering samples for evaluation.