Question 1

What are the key features of Bourns Inc. CR1206-FX-1201ELF?

EZKEY · Accepted Answer

This product belongs to the Chip Resistors - Surface Mount category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Bourns Inc. with full traceability.

Question 2

What are the main application scenarios for CR1206-FX-1201ELF?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does CR1206-FX-1201ELF work?

EZKEY · Accepted Answer

This device follows established Chip Resistors - Surface Mount design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of CR1206-FX-1201ELF?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for CR1206-FX-1201ELF?

EZKEY · Accepted Answer

The global Chip Resistors - Surface Mount market is growing at ~6-8% CAGR, with particularly strong demand in power management. Bourns Inc. CR1206-FX-1201ELF is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of CR1206-FX-1201ELF?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Bourns Inc. provides full technical support and reference designs.

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Recommended Part	Brand	Description
CRM1206-JW-1R0ELF	Bourns Inc.	Current Sense Resistors - SMD 0.5W 5% 1.0 Ohm
CRS0805-JX-100ELF	Bourns Inc.	Thick Film Resistors - SMD 10ohms .25W 5% TCR100 RES SMD
CM322522-3R3KL	Bourns Inc.	FIXED IND 3.3UH 180MA 1.2 OHM

CR1206-FX-1201ELF | Bourns Inc. RES SMD 1.2K OHM 1% 1/4W 1206

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

CR1206-FX-1201ELF Application and Selection Guide

CR1206-FX-1201ELF Model and Manufacturer Information

CR1206-FX-1201ELF Product Parameters and Description

CR1206-FX-1201ELF Application and Selection Reference

Recommended Part Numbers for CR1206-FX-1201ELF