CM453232-1R0KL INDUCTOR CHIP 1.0UH 10% 1812 SMD by Bourns Inc.

CM453232-1R0KL | Bourns Inc. INDUCTOR CHIP 1.0UH 10% 1812 SMD

Name: CM453232-1R0KL
Brand: Bourns Inc.
SKU: CM453232-1R0KL

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

INDUCTOR CHIP 1.0UH 10% 1812 SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: INDUCTOR CHIP 1.0UH 10% 1812 SMD

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CM453232-1R0KL Application and Selection Guide

CM453232-1R0KL Model and Manufacturer Information

CM453232-1R0KL, a Chip Resistors - Surface Mount manufactured by Bourns: CM453232-1R0KL helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CM453232-1R0KL meets your requirements, then check whether Bourns matches your expectations, and then refer to INDUCTOR CHIP 1.0UH 10% 1812 SMD for further evaluation.

CM453232-1R0KL Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CM453232-1R0KL include INDUCTOR CHIP 1.0UH 10% 1812 SMD. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CM453232-1R0KL Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CM453232-1R0KL has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CM453232-1R0KL is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CM453232-1R0KL

Designers looking for CM453232-1R0KL recommended parts can evaluate the following options. CM453232-1R0KL selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRM1206-FX-15R0ELF	Bourns Inc.	RES SMD 15 OHM 1% 1/2W 1206
CR0402-JW-472GLF	Bourns Inc.	RES 4.7K OHM 1/16W 5% 0402 SMD
CSS4J-4026R-1L00F	Bourns Inc.	RES 0.001 OHM 1% 4W 4026

EZKEY can provide CM453232-1R0KL recommended part comparison data and engineering samples for evaluation.