CM252016-100KL FIXED IND 10UH 80MA 3.5 OHM SMD by Bourns Inc.

CM252016-100KL | Bourns Inc. FIXED IND 10UH 80MA 3.5 OHM SMD

Name: CM252016-100KL
Brand: Bourns Inc.
SKU: CM252016-100KL

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

FIXED IND 10UH 80MA 3.5 OHM SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: FIXED IND 10UH 80MA 3.5 OHM SMD

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

CM252016-100KL Application and Selection Guide

CM252016-100KL Model and Manufacturer Information

CM252016-100KL, a Chip Resistors - Surface Mount manufactured by Bourns: CM252016-100KL helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether CM252016-100KL meets your requirements, then check whether Bourns matches your expectations, and then refer to FIXED IND 10UH 80MA 3.5 OHM SMD for further evaluation.

CM252016-100KL Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product CM252016-100KL include FIXED IND 10UH 80MA 3.5 OHM SMD. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

CM252016-100KL Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product CM252016-100KL has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, CM252016-100KL is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for CM252016-100KL

Designers looking for CM252016-100KL recommended parts can evaluate the following options. CM252016-100KL selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
FW20A10R0JA	Bourns Inc.	Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo
CR1206-FX-31R6ELF	Bourns Inc.	RES SMD 31.6 OHM 1% 1/4W 1206
CR0603-JW-431ELF	Bourns Inc.	RES SMD 430 OHM 5% 1/10W 0603

EZKEY can provide CM252016-100KL recommended part comparison data and engineering samples for evaluation.