Question 1

What are the key features of Infineon Technologies BTS442-E2?

EZKEY · Accepted Answer

This product belongs to the Power Switch ICs - Power Distribution category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Infineon Technologies with full traceability.

Question 2

What are the main application scenarios for BTS442-E2?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does BTS442-E2 work?

EZKEY · Accepted Answer

This device follows established Power Switch ICs - Power Distribution design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of BTS442-E2?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for BTS442-E2?

EZKEY · Accepted Answer

The global Power Switch ICs - Power Distribution market is growing at ~6-8% CAGR, with particularly strong demand in power management. Infineon Technologies BTS442-E2 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of BTS442-E2?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Infineon Technologies provides full technical support and reference designs.

Channel Type	High-Side
Current Limit	Active
Data Tier	Family Level
Diagnostic / Sense	Analog current sense / fault
Features	General Purpose
Function	Smart High-Side Power Switch
Mounting Type	SMD / Through Hole
Number Of Channels	1 or 2
Operating Temperature	-40°C ~ +85°C
Output Current	0.5 ~ 5 A per channel
Overcurrent Protection	Yes
Overtemperature Protection	Yes
Package / Case	DSO / DPAK / TO
Product Type	Integrated Circuit
RoHS	Compliant
Supply Voltage (VS)	4.5 ~ 60 V

Recommended Part	Brand	Description
BTS51202EKAXUMA1	Infineon Technologies	IC PWR SW HI-SIDE 2CH DSO14-40
BTS740S2XUMA1	Infineon Technologies	IC SWITCH POWER HISIDE DSO-20
BTS462T	Infineon Technologies	IC SWITCH PWR HISIDE TO252-5

BTS442-E2 | Infineon Technologies

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

BTS442-E2 Application and Selection Guide

BTS442-E2 Model and Manufacturer Information

BTS442-E2 Product Parameters and Description

BTS442-E2 Application and Selection Reference

Recommended Part Numbers for BTS442-E2