BH600 HOLDER COIN CELL FOR 16MM CELL by MPD (Memory Protection Devices)

BH600 | MPD (Memory Protection Devices) HOLDER COIN CELL FOR 16MM CELL

Name: BH600
Brand: MPD (Memory Protection Devices)
SKU: BH600

Category: Coin Cell Battery Holders

Brand: MPD (Memory Protection Devices)

HOLDER COIN CELL FOR 16MM CELL

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: HOLDER COIN CELL FOR 16MM CELL

Technical Parameters

Battery Type	Coin Cell / Cylindrical
Brand	MPD
Contact Material	Phosphor Bronze
Data Tier	Family Level
Feature	Standard
Mounting Type	SMD / Through Hole
Operating Temperature	-40 to +85 C
Packaging	Tape & Reel
Product Type	Battery Holder / Clip
RoHS Compliant	Yes
Supply Voltage	3.3 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

BH600 Application and Selection Guide

BH600 Model and Manufacturer Information

BH600, a Coin Cell Battery Holders manufactured by MPD: BH600 helps you confirm the specific model, while MPD helps you confirm the product source. If you are selecting a part, you can first check whether BH600 meets your requirements, then check whether MPD matches your expectations, and then refer to HOLDER COIN CELL FOR 16MM CELL for further evaluation.

BH600 Product Parameters and Description

The main parameters of MPD's Coin Cell Battery Holders product BH600 include HOLDER COIN CELL FOR 16MM CELL. This is a Coin Cell Battery Holders produced by MPD, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

BH600 Application and Selection Reference

MPD's Coin Cell Battery Holders product BH600 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, BH600 is a Coin Cell Battery Holders solution worth considering, and manufacturer MPD provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for BH600

Designers looking for BH600 recommended parts can evaluate the following options. BH600 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
BH600-5.8	MPD (Memory Protection Devices)	BATTERY HOLDER COIN 16MM PC PIN
BH32T-C-G	MPD (Memory Protection Devices)	BATTERY HOLDER COIN 20MM PC PIN
BK-913	MPD (Memory Protection Devices)	RETAINER CR2032 WITH PC PINS

EZKEY can provide BH600 recommended part comparison data and engineering samples for evaluation.