BD6393FP-E2 IC MOTOR DRIVER PAR 25HSOP by Rohm Semiconductor

BD6393FP-E2 | Rohm Semiconductor IC MOTOR DRIVER PAR 25HSOP

Name: BD6393FP-E2
Brand: Rohm Semiconductor
SKU: BD6393FP-E2

Category: LED Lighting Driver ICs

Brand: Rohm Semiconductor

IC MOTOR DRIVER PAR 25HSOP

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IC MOTOR DRIVER PAR 25HSOP

Technical Parameters

Applications	General Purpose
Brand	Rohm
Device Type	LED Lighting Driver IC
Dimming Method	PWM
Feature	LED Backlight Driver
Input Voltage	4.5 to 28 V
Mounting Type	SMD
Operating Temperature	-40 to +105 C
Output Channel	1 Channel
Packaging	Tape & Reel
Product Type	LED
RoHS	Compliant
RoHS Compliant	Yes
Termination	Solder
Topology	Constant Current

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

BD6393FP-E2 Application and Selection Guide

BD6393FP-E2 Model and Manufacturer Information

BD6393FP-E2, a LED Lighting Driver ICs manufactured by Rohm: BD6393FP-E2 helps you confirm the specific model, while Rohm helps you confirm the product source. If you are selecting a part, you can first check whether BD6393FP-E2 meets your requirements, then check whether Rohm matches your expectations, and then refer to IC MOTOR DRIVER PAR 25HSOP for further evaluation.

BD6393FP-E2 Product Parameters and Description

The main parameters of Rohm's LED Lighting Driver ICs product BD6393FP-E2 include IC MOTOR DRIVER PAR 25HSOP. This is a LED Lighting Driver ICs produced by Rohm, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

BD6393FP-E2 Application and Selection Reference

Rohm's LED Lighting Driver ICs product BD6393FP-E2 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, BD6393FP-E2 is a LED Lighting Driver ICs solution worth considering, and manufacturer Rohm provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for BD6393FP-E2

Designers looking for BD6393FP-E2 recommended parts can evaluate the following options. BD6393FP-E2 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
BD9A400MUV-E2	Rohm Semiconductor	IC REG BUCK ADJ 4A SYNC 16VQFN
BD9F800MUX-ZE2	ROHM Semiconductor	4.5V TO 28V INPUT, 8.0A INTEGRAT
BD48K47G-TL	ROHM Semiconductor	Reset IC,4.7V,Open Drain,pin1 gnd,SSOP3

EZKEY can provide BD6393FP-E2 recommended part comparison data and engineering samples for evaluation.