What are the key features of NXP Semiconductors BCP56-10?

This product belongs to the Bipolar Transistors - BJT category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by NXP Semiconductors with full traceability.

What are the main application scenarios for BCP56-10?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does BCP56-10 work?

This device follows established Bipolar Transistors - BJT design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of BCP56-10?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for BCP56-10?

The global Bipolar Transistors - BJT market is growing at ~6-8% CAGR, with particularly strong demand in power management. NXP Semiconductors BCP56-10 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of BCP56-10?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, NXP Semiconductors provides full technical support and reference designs.

BCP56-10 Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73 by NXP Semiconductors

BCP56-10 | NXP Semiconductors Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73

Category: Bipolar Transistors - BJT

Brand: NXP Semiconductors

Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73

Technical Parameters

Collector Current	2 A
Collector Emitter Saturation Voltage	0.5 V max
Configuration	Single
Hfe	hFE 40-250
Mounting Style	Surface Mount
Mounting Type	Surface Mount
Package Type	SOT-223
Polarity	PNP
Power Dissipation	2.2 W
Product Type	Chip Resistor
RoHS	Compliant
Temperature Range	-65 to +150 C
Thermal Resistance	Rth j-amb 62.5 K/W
Transistor Type	BJT
Transition Frequency	14 MHz
Vceo	60 V

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

BCP56-10 Application and Selection Guide

BCP56-10 Model and Manufacturer Information

BCP56-10, a Bipolar Transistors - BJT manufactured by NXP Semiconductors: BCP56-10 helps you confirm the specific model, while NXP Semiconductors helps you confirm the product source. If you are selecting a part, you can first check whether BCP56-10 meets your requirements, then check whether NXP Semiconductors matches your expectations, and then refer to Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73 for further evaluation.

BCP56-10 Product Parameters and Description

The main parameters of NXP Semiconductors's Bipolar Transistors - BJT product BCP56-10 include Trans GP BJT NPN 80V 1A Automotive 4-Pin(3+Tab) SC-73. This is a Bipolar Transistors - BJT produced by NXP Semiconductors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

BCP56-10 Application and Selection Reference

NXP Semiconductors's Bipolar Transistors - BJT product BCP56-10 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, BCP56-10 is a Bipolar Transistors - BJT solution worth considering, and manufacturer NXP Semiconductors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for BCP56-10

Designers looking for BCP56-10 recommended parts can evaluate the following options. BCP56-10 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
PBSS4350T	NXP Semiconductors
BCM53DS	NXP Semiconductors	Nexperia
BCX54,115	NXP Semiconductors	晶体管类型：NPN 集射极击穿电压(Vceo)：45V 集电极电流(Ic)：1A 功率(Pd)：500mW 集电极截止电流(Icbo)：100nA 集电极-发射极饱和电压(VCE(sat)@Ic,Ib

EZKEY can provide BCP56-10 recommended part comparison data and engineering samples for evaluation.