What are the key features of Microchip Technology ATMEGA48PB-MUR?

This product belongs to the 8-bit Microcontrollers - MCU category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Microchip Technology with full traceability.

What are the main application scenarios for ATMEGA48PB-MUR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ATMEGA48PB-MUR work?

This device follows established 8-bit Microcontrollers - MCU design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ATMEGA48PB-MUR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ATMEGA48PB-MUR?

The global 8-bit Microcontrollers - MCU market is growing at ~6-8% CAGR, with particularly strong demand in power management. Microchip Technology ATMEGA48PB-MUR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ATMEGA48PB-MUR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Microchip Technology provides full technical support and reference designs.

ATMEGA48PB-MUR 8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN by Microchip Technology

ATMEGA48PB-MUR | Microchip Technology 8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN

Category: 8-bit Microcontrollers - MCU

Brand: Microchip Technology

8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN

Technical Parameters

Brand	Microchip Technology
Category	8-bit Microcontrollers - MCU
Core	AVR
Data Tier	Family Level
Description	8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN
EEPROM	256 B EEPROM
Flash Memory	4 KB Flash
Manufacturer	Microchip Technology
Max Clock Frequency	20 MHz
Operating Temperature	-40 to +85 C
Operating Voltage	1.8 to 5.5 V
Packaging	Reel
Product Type	Microcontroller (MCU)
RoHS	Compliant
SRAM	512 B SRAM
Standard Pack Qty	6000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 ATMEGA48PB-MUR Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Microchip-Technology/ATMEGA48PB-MUR?qs=KLFHFgXTQiDXwCafGQr6EA%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ATMEGA48PB-MUR Application and Selection Guide

ATMEGA48PB-MUR Model and Manufacturer Information

ATMEGA48PB-MUR, a 8-bit Microcontrollers - MCU manufactured by Microchip Technology: ATMEGA48PB-MUR helps you confirm the specific model, while Microchip Technology helps you confirm the product source. If you are selecting a part, you can first check whether ATMEGA48PB-MUR meets your requirements, then check whether Microchip Technology matches your expectations, and then refer to 8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN for further evaluation.

ATMEGA48PB-MUR Product Parameters and Description

The main parameters of Microchip Technology's 8-bit Microcontrollers - MCU product ATMEGA48PB-MUR include 8-bit Microcontrollers - MCU 4KB 256B 512B 20 MHZ QFN/MLF GRN. This is a 8-bit Microcontrollers - MCU produced by Microchip Technology, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ATMEGA48PB-MUR Application and Selection Reference

Microchip Technology's 8-bit Microcontrollers - MCU product ATMEGA48PB-MUR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ATMEGA48PB-MUR is a 8-bit Microcontrollers - MCU solution worth considering, and manufacturer Microchip Technology provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ATMEGA48PB-MUR

Designers looking for ATMEGA48PB-MUR recommended parts can evaluate the following options. ATMEGA48PB-MUR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
AT24C04D-STUM-T	Microchip Technology	IC EEPROM 4K I2C 1MHZ SOT23-5
ATSAME54P19A-CTUT	Microchip Technology	IC MCU 32BIT 512KB FLASH 120BGA
AT27C010-70PU	Microchip Technology	IC EPROM 1M PARALLEL 32DIP

EZKEY can provide ATMEGA48PB-MUR recommended part comparison data and engineering samples for evaluation.