Question 1

What are the key features of Abracon Corporation ASPI-4020S-220M-T?

EZKEY · Accepted Answer

This product belongs to the Fixed Inductors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Abracon Corporation with full traceability.

Question 2

What are the main application scenarios for ASPI-4020S-220M-T?

EZKEY · Accepted Answer

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

Question 3

How does ASPI-4020S-220M-T work?

EZKEY · Accepted Answer

This device follows established Fixed Inductors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

Question 4

What is the technical performance of ASPI-4020S-220M-T?

EZKEY · Accepted Answer

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

Question 5

What is the current market demand for ASPI-4020S-220M-T?

EZKEY · Accepted Answer

The global Fixed Inductors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Abracon Corporation ASPI-4020S-220M-T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

Question 6

What are the technical characteristics of ASPI-4020S-220M-T?

EZKEY · Accepted Answer

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Abracon Corporation provides full technical support and reference designs.

Brand	Abracon
Data Tier	Family Level
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Product Type	Inductor
RoHS	Compliant
Series	ASPI

Recommended Part	Brand	Description
AIML-0402-2R2K-T	Abracon Corporation	Inductor RF Shielded Multi-Layer 2.2uH 10% 10MHz 20Q-Factor Ferrite 0.01A 1.75Ohm DCR 0402 T/R
ASMPH-0805-1R0M-T	Abracon Corporation	Inductor Power Shielded Multi-Layer 1uH 20% 1MHz Ferrite 1.3A 0.11Ohm DCR 0805 T/R
ATFC-0402-2N7-BT	Abracon Corporation	Inductor RF Thin Film 0.0027uH 0.1nH 500MHz 13Q-Factor Ceramic 0.44A 0.35Ohm DCR 0402 T/R

ASPI-4020S-220M-T | Abracon Corporation Inductor Power Shielded Wirewound 22uH 20% 100KHz Ferrite 0.62A 0.35Ohm DCR 1515 T/R

Product Details

PDF Datasheet

Technical Docs

Technical Parameters

ASPI-4020S-220M-T Application and Selection Guide

ASPI-4020S-220M-T Model and Manufacturer Information

ASPI-4020S-220M-T Product Parameters and Description

ASPI-4020S-220M-T Application and Selection Reference

Recommended Part Numbers for ASPI-4020S-220M-T