What are the key features of Texas Instruments ADS8509IDBR?

This product belongs to the Analog to Digital Converters - ADC category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for ADS8509IDBR?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ADS8509IDBR work?

This device follows established Analog to Digital Converters - ADC design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ADS8509IDBR?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ADS8509IDBR?

The global Analog to Digital Converters - ADC market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments ADS8509IDBR is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ADS8509IDBR?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

ADS8509IDBR Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB by Texas Instruments

ADS8509IDBR | Texas Instruments Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB

Category: Analog to Digital Converters - ADC

Brand: Texas Instruments

Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB

Technical Parameters

Brand	Texas Instruments
Category	Analog to Digital Converters - ADC
Data Tier	Family Level
Description	Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB
Manufacturer	Texas Instruments
Operating Temperature	-40 to +85 C
Packaging	Reel
Product Type	Integrated Circuit
RoHS	Compliant
Series	ADS8509
Standard Pack Qty	2000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ADS8509IDBR Application and Selection Guide

ADS8509IDBR Model and Manufacturer Information

ADS8509IDBR, a Analog to Digital Converters - ADC manufactured by Texas Instruments: ADS8509IDBR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether ADS8509IDBR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB for further evaluation.

ADS8509IDBR Product Parameters and Description

The main parameters of Texas Instruments's Analog to Digital Converters - ADC product ADS8509IDBR include Analog to Digital Converters - ADC 16-Bit 250kHz CMOS w /Serial Interface A A 595-ADS8509IDB. This is a Analog to Digital Converters - ADC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ADS8509IDBR Application and Selection Reference

Texas Instruments's Analog to Digital Converters - ADC product ADS8509IDBR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ADS8509IDBR is a Analog to Digital Converters - ADC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ADS8509IDBR

Designers looking for ADS8509IDBR recommended parts can evaluate the following options. ADS8509IDBR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ADS7038QRTERQ1	Texas Instruments	IC ADC 12BIT SAR 16WQFN
ADS1219IRTER	Texas Instruments	IC ADC 24BIT SIGMA-DELTA 16WQFN
ATL432AIDBZR	Texas Instruments	V-Ref Adjustable 2.5V to 36V 100mA 3-Pin SOT-23 T/R

EZKEY can provide ADS8509IDBR recommended part comparison data and engineering samples for evaluation.