What are the key features of ABRACON CORPORATION ABM3B-26.000MHZ-10-1-U-T?

This product belongs to the Crystals category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by ABRACON CORPORATION with full traceability.

What are the main application scenarios for ABM3B-26.000MHZ-10-1-U-T?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does ABM3B-26.000MHZ-10-1-U-T work?

This device follows established Crystals design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of ABM3B-26.000MHZ-10-1-U-T?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for ABM3B-26.000MHZ-10-1-U-T?

The global Crystals market is growing at ~6-8% CAGR, with particularly strong demand in power management. ABRACON CORPORATION ABM3B-26.000MHZ-10-1-U-T is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of ABM3B-26.000MHZ-10-1-U-T?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, ABRACON CORPORATION provides full technical support and reference designs.

ABM3B-26.000MHZ-10-1-U-T Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms by ABRACON CORPORATION

ABM3B-26.000MHZ-10-1-U-T | ABRACON CORPORATION Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms

Category: Crystals

Brand: ABRACON CORPORATION

Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms

Technical Parameters

Brand	Abracon
Category	Crystals
Data Tier	Family Level
Description	Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms
Frequency	26.000 MHZ
Frequency Stability	+/-50 ppm
Frequency Tolerance	+/-20 ppm
Load Capacitance	18 pF
Manufacturer	ABRACON
Mounting Type	SMD
Operating Temperature	-20 to +70 C
Packaging	Reel
Product Type	Crystal / Oscillator
RoHS	Compliant
Standard Pack Qty	1000

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 ABM3B-26.000MHZ-10-1-U-T Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/ABRACON/ABM3B-26.000MHZ-10-1-U-T?qs=LMMkZCEv%2Ff2rc%2Fy43dfvIQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ABM3B-26.000MHZ-10-1-U-T Application and Selection Guide

ABM3B-26.000MHZ-10-1-U-T Model and Manufacturer Information

ABM3B-26.000MHZ-10-1-U-T, a Crystals manufactured by Abracon: ABM3B-26.000MHZ-10-1-U-T helps you confirm the specific model, while Abracon helps you confirm the product source. If you are selecting a part, you can first check whether ABM3B-26.000MHZ-10-1-U-T meets your requirements, then check whether Abracon matches your expectations, and then refer to Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms for further evaluation.

ABM3B-26.000MHZ-10-1-U-T Product Parameters and Description

The main parameters of Abracon's Crystals product ABM3B-26.000MHZ-10-1-U-T include Crystals Xtal 5032 4-SMD 26MHz Tol 10ppm Stab 10ppm -10 C - 60 C 10pF 50 Ohms. This is a Crystals produced by Abracon, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ABM3B-26.000MHZ-10-1-U-T Application and Selection Reference

Abracon's Crystals product ABM3B-26.000MHZ-10-1-U-T has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ABM3B-26.000MHZ-10-1-U-T is a Crystals solution worth considering, and manufacturer Abracon provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ABM3B-26.000MHZ-10-1-U-T

Designers looking for ABM3B-26.000MHZ-10-1-U-T recommended parts can evaluate the following options. ABM3B-26.000MHZ-10-1-U-T selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ABM3B1-25.000MHZ-10-N1G-T	Abracon Corporation	--
ABM7-14.7456MHZ-D2Y-T	Abracon Corporation	Crystal 14.7456MHz ±20ppm (Tol) ±30ppm (Stability) 18pF FUND 60Ohm 2-Pin Mini-CSMD T/R
ABM8G-25.000Mhz-10-D-2-Y-T3	ABRACON CORPORATION

EZKEY can provide ABM3B-26.000MHZ-10-1-U-T recommended part comparison data and engineering samples for evaluation.