What are the key features of Molex 87832-2014?

This product belongs to the Headers & Wire Housings category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Molex with full traceability.

What are the main application scenarios for 87832-2014?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does 87832-2014 work?

This device follows established Headers & Wire Housings design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of 87832-2014?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for 87832-2014?

The global Headers & Wire Housings market is growing at ~6-8% CAGR, with particularly strong demand in power management. Molex 87832-2014 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of 87832-2014?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Molex provides full technical support and reference designs.

87832-2014 Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R by Molex

87832-2014 | Molex Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R

Category: Headers & Wire Housings

Brand: Molex

Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R

Technical Parameters

Brand	Molex
Category	Headers & Wire Housings
Contact Material	Copper Alloy
Contact Plating	Tin / Gold
Data Tier	Family Level
Description	Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R
Manufacturer	Molex
Mounting Type	Through Hole / SMD
Operating Temperature	-40 to +105 C
Packaging	Reel
Product Type	Connector
RoHS	Compliant
Standard Pack Qty	500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

87832-2014 Application and Selection Guide

87832-2014 Model and Manufacturer Information

87832-2014, a Headers & Wire Housings manufactured by Molex: 87832-2014 helps you confirm the specific model, while Molex helps you confirm the product source. If you are selecting a part, you can first check whether 87832-2014 meets your requirements, then check whether Molex matches your expectations, and then refer to Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R for further evaluation.

87832-2014 Product Parameters and Description

The main parameters of Molex's Headers & Wire Housings product 87832-2014 include Headers & Wire Housings 2mm Pit., Milli-Grid PCB Header, Dual Row, Vert., SMT, Shrouded, 20 Pos., 0.38 m Gold (Au) Pltg, Dual Side Slots, Dual Friction Locks, Center Polarization, w/ Cap, T/R. This is a Headers & Wire Housings produced by Molex, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

87832-2014 Application and Selection Reference

Molex's Headers & Wire Housings product 87832-2014 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 87832-2014 is a Headers & Wire Housings solution worth considering, and manufacturer Molex provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for 87832-2014

Designers looking for 87832-2014 recommended parts can evaluate the following options. 87832-2014 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
90120-0124	Molex	Board Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle, LEAD FREE
76170-1026	MOLEX	CONN HEADER IMPACT 4POS EDGE MNT
90131-0125	Molex	Header 2.54mm, dual row, vertical, 10w, PK

EZKEY can provide 87832-2014 recommended part comparison data and engineering samples for evaluation.