24LC1025-I/SMG Application and Selection Guide
24LC1025-I/SMG Model and Manufacturer Information
24LC1025-I/SMG, a EEPROM manufactured by Microchip Technology Inc: 24LC1025-I/SMG helps you confirm the specific model, while Microchip Technology Inc helps you confirm the product source. If you are selecting a part, you can first check whether 24LC1025-I/SMG meets your requirements, then check whether Microchip Technology Inc matches your expectations, and then refer to -- for further evaluation.
24LC1025-I/SMG Product Parameters and Description
The main parameters of Microchip Technology Inc's EEPROM product 24LC1025-I/SMG include --. This is a EEPROM produced by Microchip Technology Inc, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
24LC1025-I/SMG Application and Selection Reference
Microchip Technology Inc's EEPROM product 24LC1025-I/SMG has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 24LC1025-I/SMG is a EEPROM solution worth considering, and manufacturer Microchip Technology Inc provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for 24LC1025-I/SMG
Designers looking for 24LC1025-I/SMG recommended parts can evaluate the following options. 24LC1025-I/SMG selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| 24LC16-0T |
Microchip Technology Inc |
|
EEPROM Serial-2Wire 16K-bit 8Block x 256 x 8 3.3V/5V Automotive 8-Pin TDFN EP T/R |
| 24LC02BT-I/SN16KVAO |
Microchip Technology Inc |
|
EEPROM - Serial I²C - 2Kb (256 x 8) - 2.5V/3.3V/5V - 8-Pin MSOP - Tape&Reel |
| 24LC16BT-/SN |
Microchip Technology Inc |
|
2K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 0.150 INCH, PLASTIC, SOIC-8 |
EZKEY can provide 24LC1025-I/SMG recommended part comparison data and engineering samples for evaluation.