What are the key features of Microchip Technology 24LC1025-E/SN?

This product belongs to the EEPROM category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Microchip Technology with full traceability.

What are the main application scenarios for 24LC1025-E/SN?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does 24LC1025-E/SN work?

This device follows established EEPROM design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of 24LC1025-E/SN?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for 24LC1025-E/SN?

The global EEPROM market is growing at ~6-8% CAGR, with particularly strong demand in power management. Microchip Technology 24LC1025-E/SN is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of 24LC1025-E/SN?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Microchip Technology provides full technical support and reference designs.

24LC1025-E/SN EEPROM 1024K 128K X 8 2.5V by Microchip Technology

24LC1025-E/SN | Microchip Technology EEPROM 1024K 128K X 8 2.5V

Category: EEPROM

Brand: Microchip Technology

EEPROM 1024K 128K X 8 2.5V

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: EEPROM 1024K 128K X 8 2.5V

Technical Parameters

Bus Interface	I2C
Category	EEPROM
Clock Speed	100 kHz (I2C Standard)
Data Retention	200 Years
Density	See datasheet
Description	EEPROM 1024K 128K X 8 2.5V
Endurance	1,000,000 Write Cycles
Hardware Address Pins	Available
Manufacturer	Microchip Technology
Memory Type	I2C Serial EEPROM
Mounting Type	SMD / Through Hole
Operating Temperature	-40 to +85 C
Operating Voltage	1.7 to 5.5 V
Organization	See datasheet
Package / Case	SOIC-8
Packaging	Tube
RoHS	Compliant
Standard Pack Qty	100
Write Cycle Time	5 ms (typical)
Write Protect Pin	Available

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 24LC1025-E/SN Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/Microchip-Technology/24LC1025-E-SN?qs=dQMF8gqycOUao7IprZ3qzQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

24LC1025-E/SN Application and Selection Guide

24LC1025-E/SN Model and Manufacturer Information

24LC1025-E/SN, a EEPROM manufactured by Microchip Technology: 24LC1025-E/SN helps you confirm the specific model, while Microchip Technology helps you confirm the product source. If you are selecting a part, you can first check whether 24LC1025-E/SN meets your requirements, then check whether Microchip Technology matches your expectations, and then refer to EEPROM 1024K 128K X 8 2.5V for further evaluation.

24LC1025-E/SN Product Parameters and Description

The main parameters of Microchip Technology's EEPROM product 24LC1025-E/SN include EEPROM 1024K 128K X 8 2.5V. This is a EEPROM produced by Microchip Technology, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

24LC1025-E/SN Application and Selection Reference

Microchip Technology's EEPROM product 24LC1025-E/SN has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 24LC1025-E/SN is a EEPROM solution worth considering, and manufacturer Microchip Technology provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for 24LC1025-E/SN

Designers looking for 24LC1025-E/SN recommended parts can evaluate the following options. 24LC1025-E/SN selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
24AA1025-I/SM	Microchip Technology	IC EEPROM 1MBIT 400KHZ 8SOIJ
25LC640AT-E/SN	Microchip Technology	IC EEPROM 64KBIT 10MHZ 8SOIC
24LC256T-I/ST	Microchip Technology	IC EEPROM 256KBIT 400KHZ 8TSSOP

EZKEY can provide 24LC1025-E/SN recommended part comparison data and engineering samples for evaluation.