24FC256T-E/ST 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8 by Microchip Technology Inc

24FC256T-E/ST | Microchip Technology Inc 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8

Name: 24FC256T-E/ST
Brand: Microchip Technology Inc
SKU: 24FC256T-E/ST

Category: EEPROM

Brand: Microchip Technology Inc

32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8

Technical Parameters

Bus Interface	I2C
Clock Speed	100 kHz (I2C Standard)
Data Retention	200 Years
Density	256 Kbit
Endurance	1,000,000 Write Cycles
Hardware Address Pins	Available
Memory Type	I2C Serial EEPROM
Mounting Type	SMD / Through Hole
Operating Temperature	-40 to +85 C
Operating Voltage	1.7 to 5.5 V
Organization	See datasheet
Package / Case	TSSOP-8
RoHS	Compliant
Write Cycle Time	5 ms (typical)
Write Protect Pin	Available

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

24FC256T-E/ST Application and Selection Guide

24FC256T-E/ST Model and Manufacturer Information

24FC256T-E/ST, a EEPROM manufactured by Microchip Technology Inc: 24FC256T-E/ST helps you confirm the specific model, while Microchip Technology Inc helps you confirm the product source. If you are selecting a part, you can first check whether 24FC256T-E/ST meets your requirements, then check whether Microchip Technology Inc matches your expectations, and then refer to 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8 for further evaluation.

24FC256T-E/ST Product Parameters and Description

The main parameters of Microchip Technology Inc's EEPROM product 24FC256T-E/ST include 32K X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8, 4.40 MM, PLASTIC, MO-153, TSSOP-8. This is a EEPROM produced by Microchip Technology Inc, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

24FC256T-E/ST Application and Selection Reference

Microchip Technology Inc's EEPROM product 24FC256T-E/ST has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 24FC256T-E/ST is a EEPROM solution worth considering, and manufacturer Microchip Technology Inc provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for 24FC256T-E/ST

Designers looking for 24FC256T-E/ST recommended parts can evaluate the following options. 24FC256T-E/ST selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
24FC512I/SM	Microchip Technology Inc
24AA64-I/SNG	Microchip Technology Inc	--
24LC1025T-I/SMG	Microchip Technology Inc	--

EZKEY can provide 24FC256T-E/ST recommended part comparison data and engineering samples for evaluation.