What are the key features of Texas Instruments 1-776163-1?

This product belongs to the Automotive Connectors category and ships in standard packaging. It features high reliability, stable performance and low power consumption. Key parameters include wide operating range, low loss, and over-temperature protection, suitable for industrial applications. Manufactured by Texas Instruments with full traceability.

What are the main application scenarios for 1-776163-1?

Typical applications include power management, industrial control. Additionally, it is widely used in automotive electronics, telecom infrastructure, medical devices, and consumer electronics as a critical circuit component, improving system integration and energy efficiency.

How does 1-776163-1 work?

This device follows established Automotive Connectors design principles. Core functional stages include input handling, signal and power processing, and protection logic, ensuring stable operation under varying conditions. Refer to the datasheet for the detailed characteristics and application guidance.

What is the technical performance of 1-776163-1?

Performance highlights: stable characteristics across the operating temperature range, low loss, and long service life. Reliable contact and shock resistance, with protection against over-current and over-voltage where applicable. Meets industrial and automotive reliability standards where the series qualifies.

What is the current market demand for 1-776163-1?

The global Automotive Connectors market is growing at ~6-8% CAGR, with particularly strong demand in power management. Texas Instruments 1-776163-1 is a mainstream model with stable stock and a typical lead time of 2-4 weeks. Driven by new energy and smart electronics trends, inquiries for this model are steadily increasing, indicating a positive long-term outlook.

What are the technical characteristics of 1-776163-1?

Three main technical features: 1) High reliability – stable performance over the rated life; 2) Low-loss design – reduced energy loss in operation; 3) Wide adaptability – compatible with various operating conditions. Additionally, Texas Instruments provides full technical support and reference designs.

1-776163-1 Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY by Texas Instruments

1-776163-1 | Texas Instruments Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY

Category: Automotive Connectors

Brand: Texas Instruments

Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY

Technical Parameters

Application	General Purpose
Brand	TE Connectivity AMP Connectors
Category	Automotive Connectors
Data Tier	General Description
Description	Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Manufacturer	TE Connectivity / AMP
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant
Standard Pack Qty	32

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

📄 1-776163-1 Datasheet (PDF)

Source: https://cn.mouser.com/en/ProductDetail/TE-Connectivity-AMP/1-776163-1?qs=VKrXD49J9EqcsUPRwW8PqQ%3D%3D

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

1-776163-1 Application and Selection Guide

1-776163-1 Model and Manufacturer Information

1-776163-1, a Automotive Connectors manufactured by TE Connectivity AMP Connectors: 1-776163-1 helps you confirm the specific model, while TE Connectivity AMP Connectors helps you confirm the product source. If you are selecting a part, you can first check whether 1-776163-1 meets your requirements, then check whether TE Connectivity AMP Connectors matches your expectations, and then refer to Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY for further evaluation.

1-776163-1 Product Parameters and Description

The main parameters of TE Connectivity AMP Connectors's Automotive Connectors product 1-776163-1 include Automotive Connectors 35P HEADER AMPSEAL ASSEMBLY. This is a Automotive Connectors produced by TE Connectivity AMP Connectors, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

1-776163-1 Application and Selection Reference

TE Connectivity AMP Connectors's Automotive Connectors product 1-776163-1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, 1-776163-1 is a Automotive Connectors solution worth considering, and manufacturer TE Connectivity AMP Connectors provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for 1-776163-1

Designers looking for 1-776163-1 recommended parts can evaluate the following options. 1-776163-1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LM3S9B92--IQC80-C5	Texas Instruments	IC MCU 32BIT 256KB FLASH 100LQFP
LP2980AIM5-3.0	Texas Instruments	IC REG LDO 3V 0.05A SOT23-5
LM339DRG4	Texas Instruments	IC QUAD DIFF COMPARATOR 14-SOIC

EZKEY can provide 1-776163-1 recommended part comparison data and engineering samples for evaluation.