WR04X1202FTL Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R by Walsin

WR04X1202FTL | Walsin Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R

Name: WR04X1202FTL
Brand: Walsin
SKU: WR04X1202FTL

Category: General Purpose

Brand: Walsin

Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R

Technical Parameters

Brand	Walsin
Case Code (Inch)	0402
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.063 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	12 kohm
RoHS	Compliant
Series	WR
Size (L x W)	1.0 x 0.5 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-1%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

WR04X1202FTL Application and Selection Guide

WR04X1202FTL Model and Manufacturer Information

WR04X1202FTL, a General Purpose manufactured by Walsin: WR04X1202FTL helps you confirm the specific model, while Walsin helps you confirm the product source. If you are selecting a part, you can first check whether WR04X1202FTL meets your requirements, then check whether Walsin matches your expectations, and then refer to Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R for further evaluation.

WR04X1202FTL Product Parameters and Description

The main parameters of Walsin's General Purpose product WR04X1202FTL include Res Thick Film 0402 12K Ohm 1% 0.063W(1/16W) ±100ppm/°C Pad SMD T/R. This is a General Purpose produced by Walsin, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

WR04X1202FTL Application and Selection Reference

Walsin's General Purpose product WR04X1202FTL has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, WR04X1202FTL is a General Purpose solution worth considering, and manufacturer Walsin provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for WR04X1202FTL

Designers looking for WR04X1202FTL recommended parts can evaluate the following options. WR04X1202FTL selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
WR02X1R5 JAL	WALSIN	Fixed Resistor, Metal Glaze/thick Film, 0.05W, 1.5ohm, 25V, 5% +/-Tol, 600ppm/Cel, Surface Mount, 0201, CHIP, LEAD FREE
WR06X1002FTL	Walsin	Thick Film Resistors - SMD 10K ohms 1% 0603
WR08W6R80FTL	Walsin

EZKEY can provide WR04X1202FTL recommended part comparison data and engineering samples for evaluation.