WR02X1002FAL RESISTOR, THICK FILM, 10K, 1%, 25V, 0201 by Walsin Technology Corporation

WR02X1002FAL | Walsin Technology Corporation RESISTOR, THICK FILM, 10K, 1%, 25V, 0201

Name: WR02X1002FAL
Brand: Walsin Technology Corporation
SKU: WR02X1002FAL

Category: General Purpose

Brand: Walsin Technology Corporation

RESISTOR, THICK FILM, 10K, 1%, 25V, 0201

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RESISTOR, THICK FILM, 10K, 1%, 25V, 0201

Technical Parameters

Brand	Walsin Technology Corporation
Case Code (Inch)	0402
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.063 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	10 kohm
RoHS	Compliant
Series	WR
Size (L x W)	1.0 x 0.5 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-1%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

WR02X1002FAL Application and Selection Guide

WR02X1002FAL Model and Manufacturer Information

WR02X1002FAL, a General Purpose manufactured by Walsin Technology Corporation: WR02X1002FAL helps you confirm the specific model, while Walsin Technology Corporation helps you confirm the product source. If you are selecting a part, you can first check whether WR02X1002FAL meets your requirements, then check whether Walsin Technology Corporation matches your expectations, and then refer to RESISTOR, THICK FILM, 10K, 1%, 25V, 0201 for further evaluation.

WR02X1002FAL Product Parameters and Description

The main parameters of Walsin Technology Corporation's General Purpose product WR02X1002FAL include RESISTOR, THICK FILM, 10K, 1%, 25V, 0201. This is a General Purpose produced by Walsin Technology Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

WR02X1002FAL Application and Selection Reference

Walsin Technology Corporation's General Purpose product WR02X1002FAL has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, WR02X1002FAL is a General Purpose solution worth considering, and manufacturer Walsin Technology Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for WR02X1002FAL

Designers looking for WR02X1002FAL recommended parts can evaluate the following options. WR02X1002FAL selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
WR04X104JTL	Walsin Technology Corporation	RESISTOR, 0.0625 W, 5 %, 200 ppm, 100000 ohm, SURFACE MOUNT, 0402
MT31B104K101	Walsin Technology Corporation	片状电容器-100V-0.1μF-10%-X7R-1206(RoHS)
WF25L2R40FTLJ	Walsin Technology Corporation	--

EZKEY can provide WR02X1002FAL recommended part comparison data and engineering samples for evaluation.