TCAN332GDCNR IC TXRX CAN 3.3V SOT23-8 by Texas Instruments

TCAN332GDCNR | Texas Instruments IC TXRX CAN 3.3V SOT23-8

Name: TCAN332GDCNR
Brand: Texas Instruments
SKU: TCAN332GDCNR

Category: General Purpose

Brand: Texas Instruments

IC TXRX CAN 3.3V SOT23-8

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IC TXRX CAN 3.3V SOT23-8

Technical Parameters

Application	Interface
Brand	Texas Instruments
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Interface IC
RoHS	Compliant
Series	TI Interface

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TCAN332GDCNR Application and Selection Guide

TCAN332GDCNR Model and Manufacturer Information

TCAN332GDCNR, a General Purpose manufactured by Texas Instruments: TCAN332GDCNR helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TCAN332GDCNR meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to IC TXRX CAN 3.3V SOT23-8 for further evaluation.

TCAN332GDCNR Product Parameters and Description

The main parameters of Texas Instruments's General Purpose product TCAN332GDCNR include IC TXRX CAN 3.3V SOT23-8. This is a General Purpose produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TCAN332GDCNR Application and Selection Reference

Texas Instruments's General Purpose product TCAN332GDCNR has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TCAN332GDCNR is a General Purpose solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TCAN332GDCNR

Designers looking for TCAN332GDCNR recommended parts can evaluate the following options. TCAN332GDCNR selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LMV841MGX/NOPB	Texas Instruments	Operational Amplifiers - Op Amps Single CMOS Input R RIO Wide Supply Ran A 926-LMV841MG/NOPB
LM63635DQDRRRQ1	Texas Instruments	3.5-V TO 32-V, 3.25-A STEP-DOWN
LM50BIM3/NOPB	Texas Instruments	IC SENSOR TEMPERATURE SOT23-3

EZKEY can provide TCAN332GDCNR recommended part comparison data and engineering samples for evaluation.