TCAN1051HGDRQ1 IC TXRX CAN FAULT PROT 8SOIC by Texas Instruments

TCAN1051HGDRQ1 | Texas Instruments IC TXRX CAN FAULT PROT 8SOIC

Name: TCAN1051HGDRQ1
Brand: Texas Instruments
SKU: TCAN1051HGDRQ1

Category: General Purpose

Brand: Texas Instruments

IC TXRX CAN FAULT PROT 8SOIC

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IC TXRX CAN FAULT PROT 8SOIC

Technical Parameters

Application	Interface
Brand	Texas Instruments
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Interface IC
RoHS	Compliant
Series	TI Interface

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TCAN1051HGDRQ1 Application and Selection Guide

TCAN1051HGDRQ1 Model and Manufacturer Information

TCAN1051HGDRQ1, a General Purpose manufactured by Texas Instruments: TCAN1051HGDRQ1 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TCAN1051HGDRQ1 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to IC TXRX CAN FAULT PROT 8SOIC for further evaluation.

TCAN1051HGDRQ1 Product Parameters and Description

The main parameters of Texas Instruments's General Purpose product TCAN1051HGDRQ1 include IC TXRX CAN FAULT PROT 8SOIC. This is a General Purpose produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TCAN1051HGDRQ1 Application and Selection Reference

Texas Instruments's General Purpose product TCAN1051HGDRQ1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TCAN1051HGDRQ1 is a General Purpose solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TCAN1051HGDRQ1

Designers looking for TCAN1051HGDRQ1 recommended parts can evaluate the following options. TCAN1051HGDRQ1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LM73606QRNPTQ1	Texas Instruments	Switching Voltage Regulators 3.5V to 36V, 6A Synchronous Step-Down Voltage Converter 30-WQFN -40 to 125
LMC6462BIMX/NOPB	Texas Instruments	IC OP AMP DUAL MICPWR CMOS 8SOIC
TLV2454AIPWR	Texas Instruments	IC OPAMP GP R-R 220KHZ 14TSSOP

EZKEY can provide TCAN1051HGDRQ1 recommended part comparison data and engineering samples for evaluation.