TCAN1043HDRQ1 CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1 by Texas Instruments

TCAN1043HDRQ1 | Texas Instruments CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1

Name: TCAN1043HDRQ1
Brand: Texas Instruments
SKU: TCAN1043HDRQ1

Category: CAN Interface IC

Brand: Texas Instruments

CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1

Technical Parameters

Application	Interface
Brand	Texas Instruments
Category	CAN Interface IC
Data Tier	General Description
Description	CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1
Lead Free	Yes
Manufacturer	Texas Instruments
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Interface IC
RoHS	Compliant
Series	TI Interface
Standard Pack Qty	2500

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

TCAN1043HDRQ1 Application and Selection Guide

TCAN1043HDRQ1 Model and Manufacturer Information

TCAN1043HDRQ1, a CAN Interface IC manufactured by Texas Instruments: TCAN1043HDRQ1 helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether TCAN1043HDRQ1 meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1 for further evaluation.

TCAN1043HDRQ1 Product Parameters and Description

The main parameters of Texas Instruments's CAN Interface IC product TCAN1043HDRQ1 include CAN Interface IC Automotive 70-V bus fault protected CAN A 595-TCAN1043HDQ1. This is a CAN Interface IC produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

TCAN1043HDRQ1 Application and Selection Reference

Texas Instruments's CAN Interface IC product TCAN1043HDRQ1 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, TCAN1043HDRQ1 is a CAN Interface IC solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for TCAN1043HDRQ1

Designers looking for TCAN1043HDRQ1 recommended parts can evaluate the following options. TCAN1043HDRQ1 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
LM5000SD-3/NOPB	Texas Instruments	IC REG MULT CONFIG ADJ 16WSON
LM124DR	Texas Instruments	IC OPAMP GP 1.2MHZ QUAD 14SOIC
LM78L05ACM	Texas Instruments	IC REG LDO 5V 0.1A 8SOIC

EZKEY can provide TCAN1043HDRQ1 recommended part comparison data and engineering samples for evaluation.