ST-4ETB102 Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel by Nidec Copal Electronics Corporation

ST-4ETB102 | Nidec Copal Electronics Corporation Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel

Name: ST-4ETB102
Brand: Nidec Copal Electronics Corporation
SKU: ST-4ETB102

Category: General Purpose

Brand: Nidec Copal Electronics Corporation

Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel

Technical Parameters

Application	General Purpose
Brand	Nidec Copal Electronics Corporation
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ST-4ETB102 Application and Selection Guide

ST-4ETB102 Model and Manufacturer Information

ST-4ETB102, a General Purpose manufactured by Nidec Copal Electronics Corporation: ST-4ETB102 helps you confirm the specific model, while Nidec Copal Electronics Corporation helps you confirm the product source. If you are selecting a part, you can first check whether ST-4ETB102 meets your requirements, then check whether Nidec Copal Electronics Corporation matches your expectations, and then refer to Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel for further evaluation.

ST-4ETB102 Product Parameters and Description

The main parameters of Nidec Copal Electronics Corporation's General Purpose product ST-4ETB102 include Res Cermet Trimmer 1K Ohm 20% 1/4W 1(Elec)/1(Mech)Turn 2.3mm (5 X 6.2 X 2.3mm) Gull Wing SMD T/R - Tape and Reel. This is a General Purpose produced by Nidec Copal Electronics Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ST-4ETB102 Application and Selection Reference

Nidec Copal Electronics Corporation's General Purpose product ST-4ETB102 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ST-4ETB102 is a General Purpose solution worth considering, and manufacturer Nidec Copal Electronics Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ST-4ETB102

Designers looking for ST-4ETB102 recommended parts can evaluate the following options. ST-4ETB102 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ST-4ETB501	Nidec Copal Electronics Corporation	TRIMMER 500 OHM 0.25W GW TOP ADJ
ST-4EA 10KOHM(103)	Nidec Copal Electronics Corporation
CMS-2214TB	Nidec Copal Electronics Corporation	General electronic component

EZKEY can provide ST-4ETB102 recommended part comparison data and engineering samples for evaluation.