SLF7032T-100M1R4-2PF Application and Selection Guide
SLF7032T-100M1R4-2PF Model and Manufacturer Information
SLF7032T-100M1R4-2PF, a Fixed Inductors manufactured by TDK Corporation: SLF7032T-100M1R4-2PF helps you confirm the specific model, while TDK Corporation helps you confirm the product source. If you are selecting a part, you can first check whether SLF7032T-100M1R4-2PF meets your requirements, then check whether TDK Corporation matches your expectations, and then refer to XTAL OSC XO 50.0000MHZ CMOS SMD for further evaluation.
SLF7032T-100M1R4-2PF Product Parameters and Description
The main parameters of TDK Corporation's Fixed Inductors product SLF7032T-100M1R4-2PF include XTAL OSC XO 50.0000MHZ CMOS SMD. This is a Fixed Inductors produced by TDK Corporation, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
SLF7032T-100M1R4-2PF Application and Selection Reference
TDK Corporation's Fixed Inductors product SLF7032T-100M1R4-2PF has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, SLF7032T-100M1R4-2PF is a Fixed Inductors solution worth considering, and manufacturer TDK Corporation provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for SLF7032T-100M1R4-2PF
Designers looking for SLF7032T-100M1R4-2PF recommended parts can evaluate the following options. SLF7032T-100M1R4-2PF selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| NLV32T-121J-PF |
TDK Corporation |
|
FIXED IND 120UH 70MA 11 OHM SMD |
| MPZ2012S300A |
TDK Corporation |
|
FERRITE CHIP 30 OHM 6A 0805 |
| MMZ1608R601ATA00 |
TDK Corporation |
|
Ferrite Beads Multi-Layer 600Ohm 25% 100MHz 500mA 400mOhm DCR 0603 |
EZKEY can provide SLF7032T-100M1R4-2PF recommended part comparison data and engineering samples for evaluation.