RS1B-13-F Application and Selection Guide
RS1B-13-F Model and Manufacturer Information
RS1B-13-F, a General Purpose Semiconductors manufactured by Diodes Inc: RS1B-13-F helps you confirm the specific model, while Diodes Inc helps you confirm the product source. If you are selecting a part, you can first check whether RS1B-13-F meets your requirements, then check whether Diodes Inc matches your expectations, and then refer to 直流反向耐压(Vr):100V 平均整流电流(Io):1A 正向压降(Vf):1.3V@1A 反向电流(Ir):5uA@100V 反向恢复时间(trr):150ns 工作温度:-65℃~+150℃@( for further evaluation.
RS1B-13-F Product Parameters and Description
The main parameters of Diodes Inc's General Purpose Semiconductors product RS1B-13-F include 直流反向耐压(Vr):100V 平均整流电流(Io):1A 正向压降(Vf):1.3V@1A 反向电流(Ir):5uA@100V 反向恢复时间(trr):150ns 工作温度:-65℃~+150℃@(. This is a General Purpose Semiconductors produced by Diodes Inc, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.
RS1B-13-F Application and Selection Reference
Diodes Inc's General Purpose Semiconductors product RS1B-13-F has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, RS1B-13-F is a General Purpose Semiconductors solution worth considering, and manufacturer Diodes Inc provides long-term supply program support for this product, which helps ensure supply continuity during mass production.
Recommended Part Numbers for RS1B-13-F
Designers looking for RS1B-13-F recommended parts can evaluate the following options. RS1B-13-F selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.
| Recommended Part |
Brand |
Package |
Description |
| ZLLS1000TA |
Diodes Inc |
|
Rectifier Diode Schottky 1.16A 5ns 3-Pin SOT-23 T/R |
| SMBJ20CA-13-F |
Diodes Inc |
|
TVS DIODE 20VWM 32.4VC SMB |
| SMBJ10CA-13-F |
Diodes Inc |
|
TVS Diode Single Bi-Dir 10V 600W 2-Pin SMB T/R |
EZKEY can provide RS1B-13-F recommended part comparison data and engineering samples for evaluation.