RK73B2ETTD102J Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper by KOA

RK73B2ETTD102J | KOA Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper

Name: RK73B2ETTD102J
Brand: KOA
SKU: RK73B2ETTD102J

Category: General Purpose

Brand: KOA

Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper

Technical Parameters

Brand	KOA
Case Code (Inch)	0402
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.063 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	1 kohm
RoHS	Compliant
Series	RK73B
Size (L x W)	1.0 x 0.5 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-5%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

RK73B2ETTD102J Application and Selection Guide

RK73B2ETTD102J Model and Manufacturer Information

RK73B2ETTD102J, a General Purpose manufactured by KOA: RK73B2ETTD102J helps you confirm the specific model, while KOA helps you confirm the product source. If you are selecting a part, you can first check whether RK73B2ETTD102J meets your requirements, then check whether KOA matches your expectations, and then refer to Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper for further evaluation.

RK73B2ETTD102J Product Parameters and Description

The main parameters of KOA's General Purpose product RK73B2ETTD102J include Res Thick Film 3.2 x 2.5 mm 1K Ohm 5% 0.5W(1/2W) 200ppm/ C Molded SMD Punched Paper . This is a General Purpose produced by KOA, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

RK73B2ETTD102J Application and Selection Reference

KOA's General Purpose product RK73B2ETTD102J has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, RK73B2ETTD102J is a General Purpose solution worth considering, and manufacturer KOA provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for RK73B2ETTD102J

Designers looking for RK73B2ETTD102J recommended parts can evaluate the following options. RK73B2ETTD102J selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
RK73B2HTTE242J	KOA	Thick Film Resistors - SMD 2.4Kohms 5%
RK73B1JTTD330J	KOA	Res Thick Film 0603 33 Ohm 5% 0.1W(1/10W) ±200ppm/C Molded SMD Punched Paper T/R
RH73H1JTTD5102F	KOA	RESISTOR 0603 51K 0.1W

EZKEY can provide RK73B2ETTD102J recommended part comparison data and engineering samples for evaluation.