MWSELF-2-4.1-19 CBL CLIP WIRE SADDLE NAT PUSH IN by Richco Plastic Co

MWSELF-2-4.1-19 | Richco Plastic Co CBL CLIP WIRE SADDLE NAT PUSH IN

Name: MWSELF-2-4.1-19
Brand: Richco Plastic Co
SKU: MWSELF-2-4.1-19

Category: General Purpose

Brand: Richco Plastic Co

CBL CLIP WIRE SADDLE NAT PUSH IN

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: CBL CLIP WIRE SADDLE NAT PUSH IN

Technical Parameters

Application	General Purpose
Brand	Richco Plastic Co
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MWSELF-2-4.1-19 Application and Selection Guide

MWSELF-2-4.1-19 Model and Manufacturer Information

MWSELF-2-4.1-19, a General Purpose manufactured by Richco Plastic Co: MWSELF-2-4.1-19 helps you confirm the specific model, while Richco Plastic Co helps you confirm the product source. If you are selecting a part, you can first check whether MWSELF-2-4.1-19 meets your requirements, then check whether Richco Plastic Co matches your expectations, and then refer to CBL CLIP WIRE SADDLE NAT PUSH IN for further evaluation.

MWSELF-2-4.1-19 Product Parameters and Description

The main parameters of Richco Plastic Co's General Purpose product MWSELF-2-4.1-19 include CBL CLIP WIRE SADDLE NAT PUSH IN. This is a General Purpose produced by Richco Plastic Co, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MWSELF-2-4.1-19 Application and Selection Reference

Richco Plastic Co's General Purpose product MWSELF-2-4.1-19 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MWSELF-2-4.1-19 is a General Purpose solution worth considering, and manufacturer Richco Plastic Co provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MWSELF-2-4.1-19

Designers looking for MWSELF-2-4.1-19 recommended parts can evaluate the following options. MWSELF-2-4.1-19 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
SRS6-12-01	Richco Plastic Co	Screw Support - Body Diameter 7.1 mm (0.280 in) - in)side Diameter 3.9 mm (0.153 in) - Spacer Length 19.1 mm (0.750 in) - Maximum Panel Thickness A 1.6 mm (0.062 in) - #6,M3.5
SR-4120B	Richco Plastic Co	RIVET SNAP 0.470" NYLON BLACK
MSP-4-01	Richco Plastic Co	MSP Series Natural Nylon .250 inch Circuit Board Miniature Support Post

EZKEY can provide MWSELF-2-4.1-19 recommended part comparison data and engineering samples for evaluation.