MCR03ERTJ102 RES 1K OHM 1/10W 5% 0603 SMD by Rohm Semiconductor

MCR03ERTJ102 | Rohm Semiconductor RES 1K OHM 1/10W 5% 0603 SMD

Name: MCR03ERTJ102
Brand: Rohm Semiconductor
SKU: MCR03ERTJ102

Category: Chip Resistors - Surface Mount

Brand: Rohm Semiconductor

RES 1K OHM 1/10W 5% 0603 SMD

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: RES 1K OHM 1/10W 5% 0603 SMD

Technical Parameters

Brand	Rohm Semiconductor
Case Code (Inch)	0603
Composition	Thick Film
Data Tier	Family Level
ECCN	EAR99
Halogen Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-55 to +155 C
Packaging	Tape & Reel
Power Rating	0.1 W
Product Type	Thick Film Resistor
REACH	Compliant
Resistance	1 kohm
RoHS	Compliant
Series	MCR
Size (L x W)	1.6 x 0.8 mm
Temperature Coefficient	+/-100 ppm/C
Termination	Solder Plated
Tolerance	+/-0.01%

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

MCR03ERTJ102 Application and Selection Guide

MCR03ERTJ102 Model and Manufacturer Information

MCR03ERTJ102, a Chip Resistors - Surface Mount manufactured by Rohm Semiconductor: MCR03ERTJ102 helps you confirm the specific model, while Rohm Semiconductor helps you confirm the product source. If you are selecting a part, you can first check whether MCR03ERTJ102 meets your requirements, then check whether Rohm Semiconductor matches your expectations, and then refer to RES 1K OHM 1/10W 5% 0603 SMD for further evaluation.

MCR03ERTJ102 Product Parameters and Description

The main parameters of Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03ERTJ102 include RES 1K OHM 1/10W 5% 0603 SMD. This is a Chip Resistors - Surface Mount produced by Rohm Semiconductor, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

MCR03ERTJ102 Application and Selection Reference

Rohm Semiconductor's Chip Resistors - Surface Mount product MCR03ERTJ102 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, MCR03ERTJ102 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Rohm Semiconductor provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for MCR03ERTJ102

Designers looking for MCR03ERTJ102 recommended parts can evaluate the following options. MCR03ERTJ102 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
MCR10EZPF1002	Rohm Semiconductor	RES 10K OHM 1/8W 1% 0805 SMD
MCR10EZPJ301	Rohm Semiconductor	RES SMD 300 OHM 5% 1/8W 0805
MCR03EZPFX2002	Rohm Semiconductor	RES 20K OHM 1/10W 1% 0603 SMD

EZKEY can provide MCR03ERTJ102 recommended part comparison data and engineering samples for evaluation.