LQW18AN24NJ00D Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R by Murata Electronics North America

LQW18AN24NJ00D | Murata Electronics North America Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R

Name: LQW18AN24NJ00D
Brand: Murata Electronics North America
SKU: LQW18AN24NJ00D

Category: General Purpose

Brand: Murata Electronics North America

Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R

Technical Parameters

Application	General Purpose
Brand	Murata Electronics North America
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LQW18AN24NJ00D Application and Selection Guide

LQW18AN24NJ00D Model and Manufacturer Information

LQW18AN24NJ00D, a General Purpose manufactured by Murata Electronics North America: LQW18AN24NJ00D helps you confirm the specific model, while Murata Electronics North America helps you confirm the product source. If you are selecting a part, you can first check whether LQW18AN24NJ00D meets your requirements, then check whether Murata Electronics North America matches your expectations, and then refer to Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R for further evaluation.

LQW18AN24NJ00D Product Parameters and Description

The main parameters of Murata Electronics North America's General Purpose product LQW18AN24NJ00D include Inductor RF Chip Unshielded Wirewound 0.024uH 5% 100MHz 40Q-Factor Non Magnetic 0.5A 0.21Ohm DCR 0603 T/R. This is a General Purpose produced by Murata Electronics North America, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LQW18AN24NJ00D Application and Selection Reference

Murata Electronics North America's General Purpose product LQW18AN24NJ00D has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LQW18AN24NJ00D is a General Purpose solution worth considering, and manufacturer Murata Electronics North America provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LQW18AN24NJ00D

Designers looking for LQW18AN24NJ00D recommended parts can evaluate the following options. LQW18AN24NJ00D selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
SFECV10M7KA00-R0	Murata Electronics North America	FILTER 10.7MHZ 110KHZ BANDWIDTH
PRG21BC1R0MM1RA	Murata Electronics North America	Thermistor PTC 1 Ohm 20% 2-Pin 0805 Surface Mount Solder Pad T/R Automotive
NCP03XV103E05RL	Murata Electronics North America	THERMISTOR NTC 10KOHM 3900K 0201

EZKEY can provide LQW18AN24NJ00D recommended part comparison data and engineering samples for evaluation.