LP2950CDTX-5.0/NOPB IC REG LDO 5V 0.1A TO252-3 by Texas Instruments

LP2950CDTX-5.0/NOPB | Texas Instruments IC REG LDO 5V 0.1A TO252-3

Name: LP2950CDTX-5.0/NOPB
Brand: Texas Instruments
SKU: LP2950CDTX-5.0/NOPB

Category: General Purpose

Brand: Texas Instruments

IC REG LDO 5V 0.1A TO252-3

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IC REG LDO 5V 0.1A TO252-3

Technical Parameters

Application	Power / Signal Chain
Brand	Texas Instruments
Data Tier	General Description
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Analog / Power IC
RoHS	Compliant
Series	TI

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LP2950CDTX-5.0/NOPB Application and Selection Guide

LP2950CDTX-5.0/NOPB Model and Manufacturer Information

LP2950CDTX-5.0/NOPB, a General Purpose manufactured by Texas Instruments: LP2950CDTX-5.0/NOPB helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether LP2950CDTX-5.0/NOPB meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to IC REG LDO 5V 0.1A TO252-3 for further evaluation.

LP2950CDTX-5.0/NOPB Product Parameters and Description

The main parameters of Texas Instruments's General Purpose product LP2950CDTX-5.0/NOPB include IC REG LDO 5V 0.1A TO252-3. This is a General Purpose produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LP2950CDTX-5.0/NOPB Application and Selection Reference

Texas Instruments's General Purpose product LP2950CDTX-5.0/NOPB has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LP2950CDTX-5.0/NOPB is a General Purpose solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LP2950CDTX-5.0/NOPB

Designers looking for LP2950CDTX-5.0/NOPB recommended parts can evaluate the following options. LP2950CDTX-5.0/NOPB selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TLV8542DR	Texas Instruments	Op Amp Dual Nanopower Amplifier R-R I/O 3.6V 8-Pin SOIC T/R
LMR23615DRRR	Texas Instruments	COMMERCIAL GEN 5.5 SIMPLE SWITCH
TL072ACP	Texas Instruments	IC OPAMP JFET 3MHZ DUAL 8DIP

EZKEY can provide LP2950CDTX-5.0/NOPB recommended part comparison data and engineering samples for evaluation.