LMC6464BIM/NOPB IC OP AMP QUAD MICPWR R-R 14SOIC by Texas Instruments

LMC6464BIM/NOPB | Texas Instruments IC OP AMP QUAD MICPWR R-R 14SOIC

Name: LMC6464BIM/NOPB
Brand: Texas Instruments
SKU: LMC6464BIM/NOPB

Category: General Purpose

Brand: Texas Instruments

IC OP AMP QUAD MICPWR R-R 14SOIC

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IC OP AMP QUAD MICPWR R-R 14SOIC

Technical Parameters

Application	Signal Processing
Brand	Texas Instruments
Data Tier	Family Level
Lead Free	Yes
Mounting Type	Surface Mount
Operating Temperature	-40 to +125 C
Packaging	Tape & Reel
Product Type	Analog IC
RoHS	Compliant
Series	LM

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

LMC6464BIM/NOPB Application and Selection Guide

LMC6464BIM/NOPB Model and Manufacturer Information

LMC6464BIM/NOPB, a General Purpose manufactured by Texas Instruments: LMC6464BIM/NOPB helps you confirm the specific model, while Texas Instruments helps you confirm the product source. If you are selecting a part, you can first check whether LMC6464BIM/NOPB meets your requirements, then check whether Texas Instruments matches your expectations, and then refer to IC OP AMP QUAD MICPWR R-R 14SOIC for further evaluation.

LMC6464BIM/NOPB Product Parameters and Description

The main parameters of Texas Instruments's General Purpose product LMC6464BIM/NOPB include IC OP AMP QUAD MICPWR R-R 14SOIC. This is a General Purpose produced by Texas Instruments, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

LMC6464BIM/NOPB Application and Selection Reference

Texas Instruments's General Purpose product LMC6464BIM/NOPB has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, LMC6464BIM/NOPB is a General Purpose solution worth considering, and manufacturer Texas Instruments provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for LMC6464BIM/NOPB

Designers looking for LMC6464BIM/NOPB recommended parts can evaluate the following options. LMC6464BIM/NOPB selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
TLV9001SIDCKR	Texas Instruments	Op Amp Single Low Power Amplifier R-R I/O ±2.75V/5.5V 6-Pin SC-70 T/R
ISO1042QDWVRQ1	Texas Instruments	Automotive, isolated CAN transceiver with 70-V bus fault protection & flexible data rate
TLV5610IPW	Texas Instruments	IC 8 CHANNEL DAC S/O 20-TSSOP

EZKEY can provide LMC6464BIM/NOPB recommended part comparison data and engineering samples for evaluation.