ICM-20608-G IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package by InvenSense

ICM-20608-G | InvenSense IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package

Name: ICM-20608-G
Brand: InvenSense
SKU: ICM-20608-G

Category: General Purpose

Brand: InvenSense

IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package

Technical Parameters

Application	General Purpose
Brand	InvenSense
Data Tier	General Description
ECCN	EAR99
Halogen Free	Yes
Lead Free	Yes
Packaging	Tape & Reel
Product Type	Electronic Component
REACH	Compliant
RoHS	Compliant

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

ICM-20608-G Application and Selection Guide

ICM-20608-G Model and Manufacturer Information

ICM-20608-G, a General Purpose manufactured by InvenSense: ICM-20608-G helps you confirm the specific model, while InvenSense helps you confirm the product source. If you are selecting a part, you can first check whether ICM-20608-G meets your requirements, then check whether InvenSense matches your expectations, and then refer to IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package for further evaluation.

ICM-20608-G Product Parameters and Description

The main parameters of InvenSense's General Purpose product ICM-20608-G include IMU-惯性测量单元 6-axis MotionTracking device that combines a 3-axis gyroscope, a 3-axis accelerometer in a small, 3 mm x 3 mm x 0.75 mm (16-pin LGA) package. This is a General Purpose produced by InvenSense, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

ICM-20608-G Application and Selection Reference

InvenSense's General Purpose product ICM-20608-G has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, ICM-20608-G is a General Purpose solution worth considering, and manufacturer InvenSense provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for ICM-20608-G

Designers looking for ICM-20608-G recommended parts can evaluate the following options. ICM-20608-G selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
ICS-43432	InvenSense
ICM-20600	InvenSense	LOW-POWER, HIGH-PERFORMANCE INTE
MPU-6000	InvenSense	IMU-惯性测量单元 6-Axis MEMS MotionTracking Device with DMP

EZKEY can provide ICM-20608-G recommended part comparison data and engineering samples for evaluation.