GP10T-E3/54 整流器 1300 Volt 1.0 Amp 25 Amp IFSM by Vishay Dale

GP10T-E3/54 | Vishay Dale 整流器 1300 Volt 1.0 Amp 25 Amp IFSM

Name: GP10T-E3/54
Brand: Vishay Dale
SKU: GP10T-E3/54

Category: Chip Resistors - Surface Mount

Brand: Vishay Dale

整流器 1300 Volt 1.0 Amp 25 Amp IFSM

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 整流器 1300 Volt 1.0 Amp 25 Amp IFSM

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

GP10T-E3/54 Application and Selection Guide

GP10T-E3/54 Model and Manufacturer Information

GP10T-E3/54, a Chip Resistors - Surface Mount manufactured by Vishay: GP10T-E3/54 helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether GP10T-E3/54 meets your requirements, then check whether Vishay matches your expectations, and then refer to 整流器 1300 Volt 1.0 Amp 25 Amp IFSM for further evaluation.

GP10T-E3/54 Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product GP10T-E3/54 include 整流器 1300 Volt 1.0 Amp 25 Amp IFSM. This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

GP10T-E3/54 Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product GP10T-E3/54 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, GP10T-E3/54 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for GP10T-E3/54

Designers looking for GP10T-E3/54 recommended parts can evaluate the following options. GP10T-E3/54 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
DG3535DB-T1-E1	Vishay Dale	IC SWITCH SPDT DUAL 10MICROFOOT
CRCW080518R0FKEAC	Vishay Dale	Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
CRCW080556R2FKEA	Vishay Dale	RES 56.2 OHM 1/8W 1% 0805 SMD

EZKEY can provide GP10T-E3/54 recommended part comparison data and engineering samples for evaluation.