GF1G-E3/5CA 整流器 400 Volt 1.0 Amp Glass Passivated by Vishay Dale

GF1G-E3/5CA | Vishay Dale 整流器 400 Volt 1.0 Amp Glass Passivated

Name: GF1G-E3/5CA
Brand: Vishay Dale
SKU: GF1G-E3/5CA

Category: Chip Resistors - Surface Mount

Brand: Vishay Dale

整流器 400 Volt 1.0 Amp Glass Passivated

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 整流器 400 Volt 1.0 Amp Glass Passivated

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

GF1G-E3/5CA Application and Selection Guide

GF1G-E3/5CA Model and Manufacturer Information

GF1G-E3/5CA, a Chip Resistors - Surface Mount manufactured by Vishay: GF1G-E3/5CA helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether GF1G-E3/5CA meets your requirements, then check whether Vishay matches your expectations, and then refer to 整流器 400 Volt 1.0 Amp Glass Passivated for further evaluation.

GF1G-E3/5CA Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product GF1G-E3/5CA include 整流器 400 Volt 1.0 Amp Glass Passivated. This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

GF1G-E3/5CA Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product GF1G-E3/5CA has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, GF1G-E3/5CA is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for GF1G-E3/5CA

Designers looking for GF1G-E3/5CA recommended parts can evaluate the following options. GF1G-E3/5CA selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRCW0402226RFKED	Vishay Dale	Thick Film Resistors - SMD 1/10 Watt 226ohms 1%
CRCW0603100RJNEA	Vishay Dale	RES SMD 100 OHM 5% 1/10W 0603
CRCW04021K74FKED	Vishay Dale	RES 1.74K OHM 1/16W 1% 0402 SMD

EZKEY can provide GF1G-E3/5CA recommended part comparison data and engineering samples for evaluation.