FW20A10R0JA Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo by Bourns Inc.

FW20A10R0JA | Bourns Inc. Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo

Name: FW20A10R0JA
Brand: Bourns Inc.
SKU: FW20A10R0JA

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

Datasheet not available online yet.

Can't find the datasheet you need? Contact our sourcing team and we'll help locate the official documentation from the manufacturer or our supply channels.

Request now →

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

FW20A10R0JA Application and Selection Guide

FW20A10R0JA Model and Manufacturer Information

FW20A10R0JA, a Chip Resistors - Surface Mount manufactured by Bourns: FW20A10R0JA helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether FW20A10R0JA meets your requirements, then check whether Bourns matches your expectations, and then refer to Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo for further evaluation.

FW20A10R0JA Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product FW20A10R0JA include Res Wirewound 10 Ohm 5% 2W ±200ppm/C Conformal Coated AXL Ammo. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

FW20A10R0JA Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product FW20A10R0JA has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, FW20A10R0JA is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for FW20A10R0JA

Designers looking for FW20A10R0JA recommended parts can evaluate the following options. FW20A10R0JA selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CM322522-100JL	Bourns Inc.	FIXED IND 10UH 140MA 2.1 OHM SMD
CR0603-JW-471ELF	Bourns Inc.	RES SMD 470 OHM 5% 1/10W 0603
CR1206-J/-1R2ELF	Bourns Inc.	RES SMD 1.2 OHM 5% 1/4W 1206

EZKEY can provide FW20A10R0JA recommended part comparison data and engineering samples for evaluation.