EMI103T-RC FILTER LC(T) 0.05 OHM/0.01UF TH by Bourns Inc.

EMI103T-RC | Bourns Inc. FILTER LC(T) 0.05 OHM/0.01UF TH

Name: EMI103T-RC
Brand: Bourns Inc.
SKU: EMI103T-RC

Category: Chip Resistors - Surface Mount

Brand: Bourns Inc.

FILTER LC(T) 0.05 OHM/0.01UF TH

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: FILTER LC(T) 0.05 OHM/0.01UF TH

Technical Parameters

Applications	General Purpose
Brand	Bourns
Composition	Thick Film
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +125 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Product Type	Resistor / Inductor / Trimmer
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

EMI103T-RC Application and Selection Guide

EMI103T-RC Model and Manufacturer Information

EMI103T-RC, a Chip Resistors - Surface Mount manufactured by Bourns: EMI103T-RC helps you confirm the specific model, while Bourns helps you confirm the product source. If you are selecting a part, you can first check whether EMI103T-RC meets your requirements, then check whether Bourns matches your expectations, and then refer to FILTER LC(T) 0.05 OHM/0.01UF TH for further evaluation.

EMI103T-RC Product Parameters and Description

The main parameters of Bourns's Chip Resistors - Surface Mount product EMI103T-RC include FILTER LC(T) 0.05 OHM/0.01UF TH. This is a Chip Resistors - Surface Mount produced by Bourns, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

EMI103T-RC Application and Selection Reference

Bourns's Chip Resistors - Surface Mount product EMI103T-RC has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, EMI103T-RC is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Bourns provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for EMI103T-RC

Designers looking for EMI103T-RC recommended parts can evaluate the following options. EMI103T-RC selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRA2512-FZ-R020ELF	Bourns Inc.	RES 0.02 OHM 1% 3W 2512
CR0603-FX-1001ELF	Bourns Inc.	RES 1K OHM 1/10W 1% 0603 SMD
CRM1206-FX-75R0ELF	Bourns Inc.	RES SMD 75 OHM 1% 1/2W 1206

EZKEY can provide EMI103T-RC recommended part comparison data and engineering samples for evaluation.