DF10SA-E3/45 桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM by Vishay Dale

DF10SA-E3/45 | Vishay Dale 桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM

Name: DF10SA-E3/45
Brand: Vishay Dale
SKU: DF10SA-E3/45

Category: Chip Resistors - Surface Mount

Brand: Vishay Dale

桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM

Stock: On request

Inquire Now

Product Details

PDF Datasheet

Technical Docs

Description: 桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM

Technical Parameters

Applications	General Purpose
Brand	Vishay
Composition	Thick Film
Configuration	Single
Data Tier	Family Level
Failure Rate	Not Applicable
Features	General Purpose
Lead Free	Yes
Mounting Type	Surface Mount
Number of Terminals	2
Operating Temperature	-55 to +150 C
Package / Case	SMD / Through Hole
Packaging	Tape & Reel
Polarity	Standard
Product Type	Resistor / Diode
Recovery Time	Standard
RoHS	Compliant
Termination	Solder

Standard Packaging: Standard packaging refers to the minimum packaging quantity obtained from the manufacturer/distributor. Therefore, the minimum order quantity may be less than the manufacturer's standard packaging quantity. When products are broken down into smaller quantities, the packaging type (i.e., reel, tube, tray) may change, subject to actual packaging delivery.

No datasheet available yet. Submit an inquiry and we'll provide it within 30 minutes.

PCB Footprint (.pcb)

3D Model (.stp)

Schematic Symbol (.sch)

DXF Drawing

DF10SA-E3/45 Application and Selection Guide

DF10SA-E3/45 Model and Manufacturer Information

DF10SA-E3/45, a Chip Resistors - Surface Mount manufactured by Vishay: DF10SA-E3/45 helps you confirm the specific model, while Vishay helps you confirm the product source. If you are selecting a part, you can first check whether DF10SA-E3/45 meets your requirements, then check whether Vishay matches your expectations, and then refer to 桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM for further evaluation.

DF10SA-E3/45 Product Parameters and Description

The main parameters of Vishay's Chip Resistors - Surface Mount product DF10SA-E3/45 include 桥式整流器 1.0 Amp 1000 Volt 30 Amp IFSM. This is a Chip Resistors - Surface Mount produced by Vishay, and it also offers good applicability in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices.

DF10SA-E3/45 Application and Selection Reference

Vishay's Chip Resistors - Surface Mount product DF10SA-E3/45 has a relatively wide range of applications in embedded systems, common 3C electronics, automotive electronics, electronic devices, and IoT devices. Overall, DF10SA-E3/45 is a Chip Resistors - Surface Mount solution worth considering, and manufacturer Vishay provides long-term supply program support for this product, which helps ensure supply continuity during mass production.

Recommended Part Numbers for DF10SA-E3/45

Designers looking for DF10SA-E3/45 recommended parts can evaluate the following options. DF10SA-E3/45 selection decisions should verify parameters, tolerance and packaging against the original design bill of materials.

Recommended Part	Brand	Description
CRCW06030000Z0EAHP	Vishay Dale	RES 0.0 OHM .25W JUMP 0603 SMD
CRCW0402887RFKED	Vishay Dale	RES SMD 887 OHM 1% 1/16W 0402
CPCP0268R00JE32	Vishay Dale	RES 68 OHM 2W 5% RADIAL

EZKEY can provide DF10SA-E3/45 recommended part comparison data and engineering samples for evaluation.